EUVIMEDEUVIMED entdecken
Crossref

Virtual pre-assembly method for bridge tower crossbeam lifting based on temperature effect analysis and 3D laser scanning technology

Peng-jie Wan, Ze Chen, Xin-ping Ye, Qi Xia, Yan Xu, Jian Zhang

Advances in Structural Engineering · 2025-11 · 28 (15) · 2910-2924

DOI: 10.1177/13694332251366713 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Structural Engineering, online erschienen am 05.08.2025. Verfasst von Peng-jie Wan und 5 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 28 Literaturangaben. Gefördert von: Advanced Ocean Institute of Southeast University, Jiangsu Provincial Double-Innovation Doctoral Program, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

By transferring on-site construction operations to a controlled factory environment, prefabricated construction technology has significantly reduced the adverse interference of factors such as transportation and weather conditions on the construction process. However, factors including fabrication and assembly inaccuracies, along with the deformation of components, have the potential to reduce the precision of prefabricated assembly. To address these challenges, this study proposes a virtual pre-assembly method for bridge tower crossbeam lifting, integrating temperature effect analysis with 3D laser scanning technology. The method begins with a theoretical investigation into the deformation behavior of bridge towers and crossbeams under different temperature gradient patterns. Radiative heat transfer theory is then employed to compute the thermal profile of a bridge tower, which is introduced into a finite element model to analyze and validate the time-dependent displacement characteristics of the structure. High-precision point cloud data of crossbeam connection interfaces are acquired via 3D laser scanning. These data are aligned using point cloud registration techniques to achieve accurate spatial integration of the crossbeam and bridge tower. By incorporating the time-varying displacement data obtained from thermal analysis, the spatial positions of key control points in the point cloud are adjusted to simulate deformations encountered during actual construction. This virtual pre-assembly approach provides a visual and quantitative assessment of alignment tolerances with daily periods, enabling more accurate monitoring and control of the crossbeam lifting process.

Förderung

  • Advanced Ocean Institute of Southeast University
  • Jiangsu Provincial Double-Innovation Doctoral Program
  • National Natural Science Foundation of China
  • Natural Science Foundation of Jiangsu Province

Zitieren

APA

Wan, P., Chen, Z., Ye, X., Xia, Q., Xu, Y., & Zhang, J. (2025). Virtual pre-assembly method for bridge tower crossbeam lifting based on temperature effect analysis and 3D laser scanning technology. Advances in Structural Engineering, 28(15), 2910-2924. https://doi.org/10.1177/13694332251366713

Vancouver

Wan P, Chen Z, Ye X, Xia Q, Xu Y, Zhang J. Virtual pre-assembly method for bridge tower crossbeam lifting based on temperature effect analysis and 3D laser scanning technology. Advances in Structural Engineering. 2025;28(15):2910-2924. doi:10.1177/13694332251366713

BibTeX
@article{Wan2025,
  author = {Wan, Peng-jie and Chen, Ze and Ye, Xin-ping and Xia, Qi and Xu, Yan and Zhang, Jian},
  title = {Virtual pre-assembly method for bridge tower crossbeam lifting based on temperature effect analysis and 3D laser scanning technology},
  journal = {Advances in Structural Engineering},
  year = {2025},
  volume = {28},
  number = {15},
  pages = {2910--2924},
  doi = {10.1177/13694332251366713}
}
Kostenlos starten →