EUVIMEDEUVIMED entdecken
Crossref

Local bond-slip model between steel bars and concrete after exposure to high temperatures

Ming-Run Li, Tian-Ci Wang, Jian Liang, Nian-Guan Teng, Wan-Yang Gao

Advances in Structural Engineering · 2025-06 · 28 (8) · 1440-1460

DOI: 10.1177/13694332241310679 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Structural Engineering, online erschienen am 23.12.2024. Verfasst von Ming-Run Li und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 61 Literaturangaben. Gefördert von: Open Foundation of Yunnan Key Laboratory of Building Structure and New Materials, Natural Science Foundation of Shanghai Municipality, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The impact of high-temperature exposure on the residual bond behavior between deformed steel bars and concrete is a critical aspect that affects their composite interaction and the load-bearing capacity of reinforced concrete (RC) members after fire events. This paper presents an analytical method to predict the residual bond behavior and failure modes of steel bars embedded in concrete after exposure to high temperatures. The concrete cover is modeled as a thick-walled cylinder with the inner surface under uniform pressure. During the loading process, the concrete cover is divided into two portions: an intact outer portion and a cracked inner portion. The material properties of both steel and concrete, along with the tension-softening characteristics of the cracked inner portion, are well-defined in the analytical method. Simplified equations are developed to estimate the maximum radial stresses, residual bond strength and interfacial slip parameters, which together define the bond-slip relationship at the steel bar-to-concrete interface after high-temperature exposure. The accuracy and validity of these simplified equations are extensively verified by comparing the predictions obtained from these simplified equations with corresponding analytical results, experimental data from the literature and the load-displacement curves predicted by the proposed finite element model.

Förderung

  • Open Foundation of Yunnan Key Laboratory of Building Structure and New Materials
  • Natural Science Foundation of Shanghai Municipality
  • National Natural Science Foundation of China

Zitieren

APA

Li, M., Wang, T., Liang, J., Teng, N., & Gao, W. (2025). Local bond-slip model between steel bars and concrete after exposure to high temperatures. Advances in Structural Engineering, 28(8), 1440-1460. https://doi.org/10.1177/13694332241310679

Vancouver

Li M, Wang T, Liang J, Teng N, Gao W. Local bond-slip model between steel bars and concrete after exposure to high temperatures. Advances in Structural Engineering. 2025;28(8):1440-1460. doi:10.1177/13694332241310679

BibTeX
@article{Li2025,
  author = {Li, Ming-Run and Wang, Tian-Ci and Liang, Jian and Teng, Nian-Guan and Gao, Wan-Yang},
  title = {Local bond-slip model between steel bars and concrete after exposure to high temperatures},
  journal = {Advances in Structural Engineering},
  year = {2025},
  volume = {28},
  number = {8},
  pages = {1440--1460},
  doi = {10.1177/13694332241310679}
}
Kostenlos starten →