Flexural performance of ultra-high performance concrete beams produced with granite manufactured sand
Advances in Structural Engineering · 2025-06 · 28 (8) · 1348-1362
DOI: 10.1177/13694332241307720 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advances in Structural Engineering, online erschienen am 13.12.2024. Verfasst von Jianan Qi und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 49 Literaturangaben. Gefördert von: National Natural Science Foundation of China, State Key Laboratory Mountain Bridge and Tunnel Engineering, Jiangsu Graduate Research and Practice Innovation Program.
Abstract (Originalsprache)
Manufactured sand (MS) has different characteristics to natural sand (NS), particularly in terms of morphology and size distribution. The flexural behavior of concrete beams reinforced with MS presents a critical challenge when using MS in engineering practice. In the present study, granite manufactured sand (GMS) was used as alternatives for NS. Six ultra-high performance concrete (UHPC) beams with varying GMS contents were subjected to flexural performance testing. The failure mode of UHPC beams with GMS (GMS-UHPC beams) was similar to that of UHPC beams with NS (NS-UHPC beams). The workability of MS-UHPC exhibited an increase initially, followed by a decrease as the increasing GMS content. The test results indicated that a valley was observed in the flexural performance of UHPC beams with different GMS contents. The response of all test beams could be categorized into three distinct stages. Compared to the NS-UHPC beam, the GMS-UHPC beams exhibited a greater occurrence of secondary cracks and a more evenly distributed crack pattern. A suitable equation was proposed to calculate the ultimate bearing capacity of UHPC flexural members with different GMS contents, and the calculated and test values matched well.
Förderung
- National Natural Science Foundation of China
- State Key Laboratory Mountain Bridge and Tunnel Engineering
- Jiangsu Graduate Research and Practice Innovation Program
- China Communications Construction Group academician special research funding project
- Innovation Program for Bridge Engineering Research Center of Southeast University
Zitieren
APA
Qi, J., Jiao, Y., Liu, C., & Wang, J. (2025). Flexural performance of ultra-high performance concrete beams produced with granite manufactured sand. Advances in Structural Engineering, 28(8), 1348-1362. https://doi.org/10.1177/13694332241307720
Vancouver
Qi J, Jiao Y, Liu C, Wang J. Flexural performance of ultra-high performance concrete beams produced with granite manufactured sand. Advances in Structural Engineering. 2025;28(8):1348-1362. doi:10.1177/13694332241307720
BibTeX
@article{Qi2025,
author = {Qi, Jianan and Jiao, Yang and Liu, Chen and Wang, Jingquan},
title = {Flexural performance of ultra-high performance concrete beams produced with granite manufactured sand},
journal = {Advances in Structural Engineering},
year = {2025},
volume = {28},
number = {8},
pages = {1348--1362},
doi = {10.1177/13694332241307720}
}
EUVIMED