Performance enhancement of two-lobe hybrid journal bearings through GA-optimized spiral-groove texturing and electrorheological lubrication
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology · 19.11.2026
DOI: 10.1177/13506501261508559 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, online erschienen am 19.11.2026. Verfasst von Saurabh K. Yadav und 3 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Gefördert von: No specfic grant is recived for this project..
Abstract (Originalsprache)
In this research work, a numerical analysis of the effects of genetic algorithm (GA) optimized spiral groove texturing and electrorheological (ER) lubricants on the performance of a hybrid journal bearing with two lobes and a hole entry has been conducted. Twelve configurations formed from two bore geometries, three surface textures and two lubricants are tested under static and dynamic loading. Compared to untextured bearings, the GA-optimized spiral groove designs resulted in increases of 20.5–27.7% in lubricant flow rate and an 8.0–26.5% reduction in frictional torque. Whereas an arbitrarily textured surface degraded the direct stiffness coefficient by up to 58.4%, GA-optimized held the loss to 13.5% at moderate load and produced a 72.1% gain at high load, improving the stiffness to damping ratio ( S D R ) by 85% to nearly seven-fold over the untextured baseline. Activating the ER lubricant further increased the damping coefficient by 8.4–17.9% and the minimum film thickness by up to 14.5%, while reducing flow by less than 0.5%. Relative to the non-optimized texture, the GA-optimized geometry raised the threshold speed by 8.7% at W ¯ 0 = 1.0 , but the threshold speed remained 17.3% below that of the untextured two-lobe bearing. The optimized geometry is therefore optimal only with respect to the chosen objective (threshold speed) among the textured designs, and texturing trades some stability margin for higher flow and lower friction.
Förderung
- No specfic grant is recived for this project.
Zitieren
APA
Yadav, S. K., Khatri, C. B., Chauhan, N. R., & Yadav, V. (2026). Performance enhancement of two-lobe hybrid journal bearings through GA-optimized spiral-groove texturing and electrorheological lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. https://doi.org/10.1177/13506501261508559
Vancouver
Yadav SK, Khatri CB, Chauhan NR, Yadav V. Performance enhancement of two-lobe hybrid journal bearings through GA-optimized spiral-groove texturing and electrorheological lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 2026. doi:10.1177/13506501261508559
BibTeX
@article{Yadav2026,
author = {Yadav, Saurabh K. and Khatri, Chandra B. and Chauhan, Nathi Ram and Yadav, Vinod},
title = {Performance enhancement of two-lobe hybrid journal bearings through GA-optimized spiral-groove texturing and electrorheological lubrication},
journal = {Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology},
year = {2026},
doi = {10.1177/13506501261508559}
}
EUVIMED