EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Elaboration and development of a realistic 3D printed model for training in ultrasound-guided placement of peripheral central venous catheter in children

Alessandro Raffaele iD, Valeria Mauri iD, Mattia Negrini, Erika Negrello, Gian Battista Parigi, Luigi Avolio, Andrea Pietrabissa, Ferdinando Auricchio, Stefania Marconi

The Journal of Vascular Access · 2024

DOI: 10.1177/11297298231187005 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Journal of Vascular Access, 2024. Verfasst von Alessandro Raffaele und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Pediatric Surgery, Fondazione IRCCS Policlinico San Matteo, Viale Camillo Golgi, Pavia, Italy. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Ultrasonography, Interventional, Models, Anatomic, Catheterization, Peripheral. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 11 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Ministero della Salute.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Simulation for training is becoming a trend topic worldwide, even if its applications are commonly limited to adulthood. Ultrasound-guided procedures require practice and experience—especially in the pediatric field, where the small size of the involved anatomical structures poses major problems. In this context, a realistic 3D printed pediatric phantom for training of the ultrasound-guided placement of peripheral central venous catheters in children was developed. Materials and methods: Starting from Computed Tomography scans of an 8 years-old girl, her left arm was virtually reconstructed—including bones, arteries, and veins—through a semi-automatic segmentation process. According to preliminary results, the most suitable 3D printing technologies to reproduce the different anatomical structures of interest were selected, considering both direct and indirect 3D printing techniques. Experienced operators were asked to evaluate the efficacy of the final model through a dedicated questionnaire.

Results

Vessels produced through indirect 3D printing latex dipping technique exhibited the best echogenicity, thickness, and mechanical properties to mimic real children’s venous vessels, while arteries—not treated and/or punctured during the procedure—were directly 3D printed through Material Jetting technology. An external mold—mimicking the arm skin—was 3D printed and a silicone-based mixture was poured to reproduce real patient’s soft tissues. Twenty expert specialists were asked to perform the final model’s validation. The phantom was rated as highly realistic in terms of morphology and functionality for the overall simulation, especially for what concerns vessels and soft tissues’ response to puncturing. On the other hand, the involved structures’ US appearance showed the lower score.

Conclusions

The present work shows the feasibility of a patient-specific 3D printed phantom for simulation and training in pediatric ultrasound-guided procedures.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalUltrasonography, InterventionalModels, AnatomicCatheterization, PeripheralCatheterization, Central VenousHumansChildFemaleCentral Venous CathetersModels, CardiovascularUpper ExtremityAge FactorsClinical Competence

Stichwörter der Autor:innen

3D printed pediatric phantom3D printingcardiovascular accesssurgical simulationultrasound-guided procedure

Autor:innen und Institutionen

  • Department of Pediatric Surgery, Fondazione IRCCS Policlinico San Matteo, Viale Camillo Golgi, Pavia, Italy.
  • SC General Surgery 2, Fondazione IRCCS Policlinico San Matteo, Viale Camillo Golgi, Pavia, Italy.
  • University of Pavia, Pavia, Italy.
  • Department of Clinico - Surgical, Diagnostic and Pediatric Sciences, University of Pavia, Pavia, Italy.
  • Department of Civil Engineering and Architecture, University of Pavia, Pavia, Italy.
  • Fondazione IRCCS Policlinico San Matteo, Pavia, Italy.

ORCID-Profile: Alessandro Raffaele, Valeria Mauri

Förderung

  • Ministero della Salute

Zitieren

APA

Raffaele, A., Mauri, V., Negrini, M., Negrello, E., Parigi, G. B., Avolio, L., Pietrabissa, A., Auricchio, F., & Marconi, S. (2024). Elaboration and development of a realistic 3D printed model for training in ultrasound-guided placement of peripheral central venous catheter in children. The Journal of Vascular Access. https://doi.org/10.1177/11297298231187005

Vancouver

Raffaele A, Mauri V, Negrini M, Negrello E, Parigi GB, Avolio L, et al. Elaboration and development of a realistic 3D printed model for training in ultrasound-guided placement of peripheral central venous catheter in children. The Journal of Vascular Access. 2024. doi:10.1177/11297298231187005

BibTeX
@article{Raffaele2024,
  author = {Raffaele, Alessandro and Mauri, Valeria and Negrini, Mattia and Negrello, Erika and Parigi, Gian Battista and Avolio, Luigi and Pietrabissa, Andrea and Auricchio, Ferdinando and Marconi, Stefania},
  title = {Elaboration and development of a realistic 3D printed model for training in ultrasound-guided placement of peripheral central venous catheter in children},
  journal = {The Journal of Vascular Access},
  year = {2024},
  doi = {10.1177/11297298231187005}
}
Kostenlos starten →