EUVIMEDEUVIMED entdecken
Crossref

Design and vibration characteristics analysis of a novel permanent magnet eddy current damper for tracked vehicle suspension

Wentao Ding, Liqun Wang, Chaoqi Lv, Guolai Yang

Journal of Vibration and Control · 01.11.2026

DOI: 10.1177/10775463261501624 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Vibration and Control, online erschienen am 01.11.2026. Verfasst von Wentao Ding und 3 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Gefördert von: Young Elite Scientists Sponsorship Program by CAST, National Natural Science Foundation of China, Fund for Fostering Distinguished Talents of Nanjing University of Science and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hydraulic dampers are widely used in tracked-vehicle suspensions but may suffer from oil leakage and temperature rise under high-frequency and high-load operating conditions. This study proposes a permanent-magnet eddy current damper driven by a planetary roller screw (RS-ECD). The planetary roller screw converts the relative linear motion of the suspension into rotary motion, while a Halbach permanent-magnet array enhances the air-gap magnetic field and electromagnetic damping torque. An analytical model and a finite-element electromagnetic model are established to investigate the mechanical and electromagnetic characteristics of the RS-ECD. The electromagnetic torque is calculated directly from the instantaneous rotor speed and coupled with a three-degree-of-freedom suspension-track dynamic model incorporating the equivalent mass of the ground-contact track segment and track-pitch-induced polygonal excitation. Under Classes D–G road conditions at 15 m/s, the RS-ECD reduces the RMS values of vehicle-body acceleration, road-wheel acceleration, suspension dynamic deflection, and dynamic wheel load by 10.3–34.6%, 29.9–66.2%, 51.3–57.5%, and 5.1–33.1%, respectively, compared with a linear hydraulic damper. Although localized peaks in vehicle-body acceleration and dynamic wheel load increase slightly under the rougher road conditions, the overall vibration intensity and suspension-stroke demand are reduced. These results demonstrate the potential of the RS-ECD for sustained vibration attenuation in tracked-vehicle suspensions while also revealing a trade-off in transient peak control.

Förderung

  • Young Elite Scientists Sponsorship Program by CAST
  • National Natural Science Foundation of China
  • Fund for Fostering Distinguished Talents of Nanjing University of Science and Technology
  • 2026 Jiangsu Province Graduate Research and Practice Innovation Program

Zitieren

APA

Ding, W., Wang, L., Lv, C., & Yang, G. (2026). Design and vibration characteristics analysis of a novel permanent magnet eddy current damper for tracked vehicle suspension. Journal of Vibration and Control. https://doi.org/10.1177/10775463261501624

Vancouver

Ding W, Wang L, Lv C, Yang G. Design and vibration characteristics analysis of a novel permanent magnet eddy current damper for tracked vehicle suspension. Journal of Vibration and Control. 2026. doi:10.1177/10775463261501624

BibTeX
@article{Ding2026,
  author = {Ding, Wentao and Wang, Liqun and Lv, Chaoqi and Yang, Guolai},
  title = {Design and vibration characteristics analysis of a novel permanent magnet eddy current damper for tracked vehicle suspension},
  journal = {Journal of Vibration and Control},
  year = {2026},
  doi = {10.1177/10775463261501624}
}
Kostenlos starten →