EUVIMEDEUVIMED entdecken
Crossref

Nonlinear finite-element modeling and optimal tracking control of a rolling ball on an elastic simply supported beam with boundary torque actuation

Yousef Sweiti, Jasem Tamimi

Journal of Vibration and Control · 04.06.2026

DOI: 10.1177/10775463261451966 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Vibration and Control, online erschienen am 04.06.2026. Verfasst von Yousef Sweiti und 1 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper develops a control-oriented finite-element (FE) formulation for a rolling ball interacting with an elastic simply supported Euler–Bernoulli beam actuated by a boundary torque at the left support. The beam is discretized using cubic Hermite elements, while the ball is modeled as a moving load with rotational dynamics governed by a no-slip rolling constraint. To retain the moving-contact effects within a fixed FE state dimension, global position-dependent interpolation operators are introduced to evaluate the beam deflection, slope, curvature, and contact-point velocity at the ball location. Applying Lagrange’s equations yields a coupled nonlinear model with a configuration-dependent inertia matrix and mixed-velocity coupling terms. A continuum of static equilibria parameterized by the ball position is then computed by enforcing static force balance together with a zero-slope rest condition at the contact point, providing consistent operating points for linearization and a position-dependent feedforward bias torque. Based on frozen-time linear models, a gain-scheduled linear–quadratic–integral (LQI) tracking controller is constructed by interpolating local LQI gains and combining them with the equilibrium feedforward term, while explicitly accounting for actuator saturation through anti-windup logic. Numerical studies for a 0.60 m beam discretized by three FE elements demonstrate accurate set-point regulation from s(0) = 0.30 m to multiple targets under a torque limit of ± 4 N m, with well-damped transients and bounded control effort. The resulting framework provides a reproducible workflow for modeling and gain-scheduled optimal tracking control of underactuated flexible structures subject to rolling moving bodies using boundary actuation.

Zitieren

APA

Sweiti, Y., & Tamimi, J. (2026). Nonlinear finite-element modeling and optimal tracking control of a rolling ball on an elastic simply supported beam with boundary torque actuation. Journal of Vibration and Control. https://doi.org/10.1177/10775463261451966

Vancouver

Sweiti Y, Tamimi J. Nonlinear finite-element modeling and optimal tracking control of a rolling ball on an elastic simply supported beam with boundary torque actuation. Journal of Vibration and Control. 2026. doi:10.1177/10775463261451966

BibTeX
@article{Sweiti2026,
  author = {Sweiti, Yousef and Tamimi, Jasem},
  title = {Nonlinear finite-element modeling and optimal tracking control of a rolling ball on an elastic simply supported beam with boundary torque actuation},
  journal = {Journal of Vibration and Control},
  year = {2026},
  doi = {10.1177/10775463261451966}
}
Kostenlos starten →