EUVIMEDEUVIMED entdecken
Crossref

Polymethylmethacrylate (PMMA) Augmentation Enhances the Mechanical Characteristics of Midfoot Beam Constructs in Charcot Neuroarthropathy Cadaver Model

Naveen Pattisapu, Dave T Huang, Giselle Porter iD, Rebisi Owhonda, Timothy Charlton, Christopher Gross iD, David Thordarson, Melodie F Metzger iD

Foot & Ankle International · 2024

DOI: 10.1177/10711007241237804 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Foot & Ankle International, 2024. Verfasst von Naveen Pattisapu und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopaedic Surgery, Cedars Sinai Medical Center, Los Angeles, CA, USA. Hauptthemen laut MEDLINE: Polymethyl Methacrylate, Cadaver, Arthropathy, Neurogenic. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 33 Literaturangaben. Gefördert von: American Orthopaedic Foot and Ankle Society.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Even with the best conservative care, patients with Charcot neuroarthropathy (CN) of the foot and ankle often ulcerate, increasing their risk of infection, amputation, and death. Surgical fixation has been associated with risk of recurrent ulceration, potentially due to poor bone quality prone to recurrent deformity and ulceration. We propose midfoot beam reconstruction with PMMA augmentation as a novel means of improving fixation.

Methods

A protocol was developed to create characteristic CN midfoot fragmentation both visually and fluoroscopically in each of 12 matched-pair cadaveric feet. Afterward, the pairs were divided into 2 groups: (1) midfoot beam fusion surgery alone, and (2) midfoot beam fusion surgery augmented with PMMA. A solid 7.0-mm beam was placed into the medial column and a solid 5.5-mm beam was placed across the lateral column. In the PMMA group, 8 to 10 mL of PMMA was inserted into the medial column. The hindfoot of each specimen was potted and the metatarsal heads were cyclically loaded for 1800 cycles, followed by load to failure while load and displacement were continually recorded.

Results

One specimen in the beam alone group failed before reaching the 1800th cycle and was not included in the failure analysis. The midfoot beam only group demonstrated greater mean displacement during cycle testing compared with the PMMA group, P < .05. The maximum force (N), stiffness (N/mm), and toughness (Nmm) were all significantly greater in the group augmented with PMMA, P < .05.

Conclusion

In a CN cadaveric model, PMMA augmentation significantly decreased gapping during cyclic loading and nearly doubled the load to failure compared with midfoot beams alone. Clinical Relevance: The results of this biomechanical study demonstrate that augmentation of midfoot beams with PMMA increases the strength and stiffness of the fusion construct. This increased mechanical toughness may help reduce the risk of nonunion and infection in patients with neuropathic midfoot collapse.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Polymethyl MethacrylateCadaverArthropathy, NeurogenicHumansBiomechanical PhenomenaBone CementsArthrodesisAged

Stichwörter der Autor:innen

Charcot neuroarthropathyPMMAmidfoot beam

Substanzen

Polymethyl MethacrylateBone Cements

Autor:innen und Institutionen

  • Department of Orthopaedic Surgery, Cedars Sinai Medical Center, Los Angeles, CA, USA.
  • Orthopaedic Biomechanics Laboratory, Cedars-Sinai Medical Center, Los Angeles, CA, USA.
  • Department of Orthopaedic Surgery, Medical University of South Carolina, Charleston SC, USA.

ORCID-Profile: Giselle Porter, Christopher Gross, Melodie F Metzger

Förderung

  • American Orthopaedic Foot and Ankle Society

Zitieren

APA

Pattisapu, N., Huang, D. T., Porter, G., Owhonda, R., Charlton, T., Gross, C., Thordarson, D., & Metzger, M. F. (2024). Polymethylmethacrylate (PMMA) Augmentation Enhances the Mechanical Characteristics of Midfoot Beam Constructs in Charcot Neuroarthropathy Cadaver Model. Foot & Ankle International. https://doi.org/10.1177/10711007241237804

Vancouver

Pattisapu N, Huang DT, Porter G, Owhonda R, Charlton T, Gross C, et al. Polymethylmethacrylate (PMMA) Augmentation Enhances the Mechanical Characteristics of Midfoot Beam Constructs in Charcot Neuroarthropathy Cadaver Model. Foot & Ankle International. 2024. doi:10.1177/10711007241237804

BibTeX
@article{Pattisapu2024,
  author = {Pattisapu, Naveen and Huang, Dave T and Porter, Giselle and Owhonda, Rebisi and Charlton, Timothy and Gross, Christopher and Thordarson, David and Metzger, Melodie F},
  title = {Polymethylmethacrylate (PMMA) Augmentation Enhances the Mechanical Characteristics of Midfoot Beam Constructs in Charcot Neuroarthropathy Cadaver Model},
  journal = {Foot & Ankle International},
  year = {2024},
  doi = {10.1177/10711007241237804}
}
Kostenlos starten →