Axial compressive behaviour of substandard concrete confined with 3D-printed PLA strips
International Journal of Damage Mechanics · 02.07.2026
DOI: 10.1177/10567895261466520 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Damage Mechanics, online erschienen am 02.07.2026. Verfasst von Anil Ozdemir und 2 weiteren Autor:innen. Die Arbeit nennt 67 Literaturangaben.
Abstract (Originalsprache)
This study explores the potential of polylactic acid (PLA) strips as sustainable reinforcement material for substandard concrete requiring enhanced axial load-bearing capacity. Experimental tests and nonlinear finite element analyses were conducted to evaluate the influence of PLA confinement on the axial compressive behaviour of concrete cylinders. The results demonstrate that PLA strips can increase compressive strength with notable improvements in stiffness and ductility depending on strip configuration and spacing. The numerical simulations showed strong agreement with the experimental data, validating the observed behavioural trends. According to numerical case study, compared with conventional carbon fibre-reinforced polymer (CFRP), PLA exhibited lower mechanical performance but offered clear environmental advantages, with significantly lower embodied energy and global warming potential than commonly used externally bonded reinforcement material. While the present work is a proof-of-concept study limited to axial loading, the findings highlight the promise of PLA as an eco-friendly alternative for low-carbon strengthening applications. In future applications, combining PLA with conventional reinforcement materials may offer an optimized balance between mechanical performance and ecological impact.
Zitieren
APA
Ozdemir, A., Bozyigit, B., & Felekoglu, B. (2026). Axial compressive behaviour of substandard concrete confined with 3D-printed PLA strips. International Journal of Damage Mechanics. https://doi.org/10.1177/10567895261466520
Vancouver
Ozdemir A, Bozyigit B, Felekoglu B. Axial compressive behaviour of substandard concrete confined with 3D-printed PLA strips. International Journal of Damage Mechanics. 2026. doi:10.1177/10567895261466520
BibTeX
@article{Ozdemir2026,
author = {Ozdemir, Anil and Bozyigit, Baran and Felekoglu, Burak},
title = {Axial compressive behaviour of substandard concrete confined with 3D-printed PLA strips},
journal = {International Journal of Damage Mechanics},
year = {2026},
doi = {10.1177/10567895261466520}
}
EUVIMED