Electrostatic layer-by-layer assembly for fabricating morphology-controlled hydroxyapatite/zirconia composite with enhanced osteogenic performance
Bio-Medical Materials and Engineering · 2026
DOI: 10.1177/09592989261419887 ↗Kurz gefasst
Fachartikel in der Zeitschrift Bio-Medical Materials and Engineering, 2026. Verfasst von Satsuki Tanaka und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Advanced Prosthodontics, Graduate School of Medical and Dental Sciences, Institute of Science Tokyo, Tokyo, Japan. Hauptthemen laut MEDLINE: Zirconium, Osteogenesis, Durapatite, Coated Materials, Biocompatible. Die Arbeit nennt 33 Literaturangaben. Gefördert von: Kazuchika Okura Memorial Foundation’s research grant, Ministry of Education, Culture, Sports, Science and Technology of Japan, Project on Design & Engineering by Joint Inverse Innovation for Materials Architecture (DEJI2MA) from the Ministry of Education, Culture, Sports, Science and T….
Abstract (Originalsprache)
Background
Yttria-stabilized zirconia (YSZ) represents a promising alternative to titanium for dental and orthopedic implants owing to its mechanical strength and esthetics. However, its bioinertness limits osteoconductivity. Although hydroxyapatite (HAp) coatings can enhance osteointegration, uniform deposition of morphology-controlled HAp on YSZ remains challenging to achieve, limiting implant optimization.
Objectives
This study was aimed at the uniform deposition of morphology-controlled HAp on YSZ using electrostatic layer-by-layer (LBL) assembly to improve biological performance.
Methods
Plate-like HAp was hydrothermally synthesized using dodecanedioic acid and surface-modified with poly(diallyldimethylammonium chloride) and poly(sodium 4-styrenesulfonate). YSZ discs were similarly charge-modified to enable electrostatic adsorption of HAp. Samples were evaluated using scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and wettability tests. Osteogenic responses were assessed using MC3T3-E1 cells through alkaline phosphatase (ALP) activity and Alizarin Red S staining.
Results
Negatively charged HAp was uniformly deposited on positively charged YSZ, forming a homogeneous coating. Characterization confirmed successful HAp deposition and improved hydrophilicity. HAp/YSZ composites enhanced osteogenic differentiation, exhibiting higher ALP activity and greater calcium deposition than YSZ.
Conclusion
LBL-mediated deposition of morphology-controlled HAp enables uniform coating and enhanced osteogenic activity on YSZ, facilitating advances in next-generation bioactive zirconia implants.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Advanced Prosthodontics, Graduate School of Medical and Dental Sciences, Institute of Science Tokyo, Tokyo, Japan.
- Anton Paar Japan KK, Tokyo, Japan.
- Department of Applied Chemistry, Faculty of Engineering, Chiba Institute of Technology, Narashino, Japan.
- Department of Masticatory Function and Health Science, Graduate School of Medical and Dental Sciences, Institute of Science Tokyo, Tokyo, Japan.
ORCID-Profile: Kosuke Nozaki
Förderung
- Kazuchika Okura Memorial Foundation’s research grant
- Ministry of Education, Culture, Sports, Science and Technology of Japan
- Project on Design & Engineering by Joint Inverse Innovation for Materials Architecture (DEJI2MA) from the Ministry of Education, Culture, Sports, Science and T…
Zitieren
APA
Tanaka, S., Nozaki, K., Yamashita, K., Nakano, Y., Hashimoto, K., Otake, S., & Wakabayashi, N. (2026). Electrostatic layer-by-layer assembly for fabricating morphology-controlled hydroxyapatite/zirconia composite with enhanced osteogenic performance. Bio-Medical Materials and Engineering. https://doi.org/10.1177/09592989261419887
Vancouver
Tanaka S, Nozaki K, Yamashita K, Nakano Y, Hashimoto K, Otake S, et al. Electrostatic layer-by-layer assembly for fabricating morphology-controlled hydroxyapatite/zirconia composite with enhanced osteogenic performance. Bio-Medical Materials and Engineering. 2026. doi:10.1177/09592989261419887
BibTeX
@article{Tanaka2026,
author = {Tanaka, Satsuki and Nozaki, Kosuke and Yamashita, Kimihiro and Nakano, Yuki and Hashimoto, Kazuaki and Otake, Shiho and Wakabayashi, Noriyuki},
title = {Electrostatic layer-by-layer assembly for fabricating morphology-controlled hydroxyapatite/zirconia composite with enhanced osteogenic performance},
journal = {Bio-Medical Materials and Engineering},
year = {2026},
doi = {10.1177/09592989261419887}
}
EUVIMED