EUVIMEDEUVIMED entdecken
Crossref

Numerical simulation research on ignition and flame propagation in strut/cavity combustor

Changlong Ruan, Kaixing Wang, Luyang Han, Yong Mu, Shaolin Wang, Fuqiang Liu, Cunxi Liu, Jinhu Yang, Yushuai Liu, Shuaiting Yan, Gang Xu, Xin’gen Lu

Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy · 30.07.2026

DOI: 10.1177/09576509261473141 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, online erschienen am 30.07.2026. Verfasst von Changlong Ruan und 11 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Gefördert von: Youth Innovation Promotion Association of CAS, National Science Foundation of China, Strategic Priority Research Program of the Chinese Academy of Sciences.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Inlet distortion significantly influences the overall performance of afterburners. This study numerically investigates the effects of non-uniform inlet velocity and temperature profiles on the flow characteristics, ignition limits, and flame propagation behavior in a strut/cavity-based combustor under sub-atmospheric pressure conditions, with an inlet velocity of 109.9 m/s and an inlet temperature of 1043 K. The results reveal that, compared to a uniform velocity inflow, increasing the velocity non-uniformity raises the ignition fuel-air ratio. However, when temperature distortion is coupled with velocity distortion, the ignition boundary fuel-air ratio decreases. The location of the velocity distortion peak markedly affects the recirculation vortex structure. The ignition equivalence ratio reaches its minimum when the distortion peak is positioned at the upper region, followed by the lower peak, while the middle peak yields the highest value. Despite varying distortion conditions, the flame propagation paths remain qualitatively similar: the flame within the cavity is entrained toward the strut trailing edge by the recirculation zone and subsequently propagates downstream. Among the cases examined, flame propagation is fastest when the distortion peak is located at the middle position, and the addition of temperature distortion further accelerates flame propagation. Nevertheless, an excessively high temperature distortion index may introduce the risk of auto-ignition. Overall, this investigation into flow, mixing, and combustion under non-uniform inlet conditions provides valuable insights for the design and application of strut/cavity-based combustors operating under complex inflow conditions.

Förderung

  • Youth Innovation Promotion Association of CAS
  • National Science Foundation of China
  • Strategic Priority Research Program of the Chinese Academy of Sciences
  • Taishan Scholars Program

Zitieren

APA

Ruan, C., Wang, K., Han, L., Mu, Y., Wang, S., Liu, F., Liu, C., Yang, J., Liu, Y., Yan, S., Xu, G., & Lu, X. (2026). Numerical simulation research on ignition and flame propagation in strut/cavity combustor. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy. https://doi.org/10.1177/09576509261473141

Vancouver

Ruan C, Wang K, Han L, Mu Y, Wang S, Liu F, et al. Numerical simulation research on ignition and flame propagation in strut/cavity combustor. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy. 2026. doi:10.1177/09576509261473141

BibTeX
@article{Ruan2026,
  author = {Ruan, Changlong and Wang, Kaixing and Han, Luyang and Mu, Yong and Wang, Shaolin and Liu, Fuqiang and Liu, Cunxi and Yang, Jinhu and Liu, Yushuai and Yan, Shuaiting and Xu, Gang and Lu, Xin’gen},
  title = {Numerical simulation research on ignition and flame propagation in strut/cavity combustor},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy},
  year = {2026},
  doi = {10.1177/09576509261473141}
}
Kostenlos starten →