EUVIMEDEUVIMED entdecken
Crossref

Effect of blockage ratio on flow field and combustion characteristics in an integrated cavity-strut dual-mode ramjet combustor

Yijie Chang, Jinhe Liu, Luyang Han, Haifeng Zhao, Kaixing Wang, Fuqiang Liu, Yong Mu, Gang Xu

Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy · 28.07.2026

DOI: 10.1177/09576509261472393 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, online erschienen am 28.07.2026. Verfasst von Yijie Chang und 7 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Gefördert von: National Science and Technology Major Project, National Natural Science Foundation of China, Youth Innovation Promotion Association of the CAS.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Driven by the demand for wide-speed-range air-breathing propulsion, this study numerically investigates the effect of blockage ratio on the non-reacting flow field, fuel-air mixing, and combustion mode transition in an integrated cavity-strut dual-mode ramjet (DMR) combustor under inflow conditions corresponding to a flight Mach number ( Ma ) of 4.0. Three-dimensional Reynolds-averaged Navier-Stokes (RANS) equations coupled with the Eddy Dissipation Model (EDM) and a single-step global kerosene-air reaction mechanism are employed, and the numerical approach is validated against published experimental data. The results demonstrate that the integrated cavity-strut configuration significantly enhances cavity recirculation and fuel-air mixing compared with the cavity-only configuration, thereby improving flame stabilization and combustion efficiency. The blockage ratio is identified as a key parameter governing the interaction between the cavity recirculation zone and the strut-induced flow structures, thereby affecting mass transport, fuel-air mixing characteristics, and combustion mode distribution. Moderate blockage ratios of σ = 0.08 and 0.10 generate relatively large recirculation zones and more uniform kerosene distribution inside the cavity, resulting in transition-mode combustion and the highest combustion efficiency of approximately 70%. In contrast, σ = 0.06 leads to insufficient heat release and scramjet mode owing to the weak cavity-strut interaction and limited fuel residence time. Although σ = 0.12 achieves a high mixing efficiency of 87%, the excessive blockage strengthens the mainstream flow and deteriorates fuel penetration, causing local fuel-rich accumulation and reduced combustion efficiency. Therefore, an appropriate blockage ratio enhances fuel-air mixing and combustion efficiency, providing critical design guidance for the integrated cavity-strut DMR combustor development.

Förderung

  • National Science and Technology Major Project
  • National Natural Science Foundation of China
  • Youth Innovation Promotion Association of the CAS
  • Taishan Scholars Program

Zitieren

APA

Chang, Y., Liu, J., Han, L., Zhao, H., Wang, K., Liu, F., Mu, Y., & Xu, G. (2026). Effect of blockage ratio on flow field and combustion characteristics in an integrated cavity-strut dual-mode ramjet combustor. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy. https://doi.org/10.1177/09576509261472393

Vancouver

Chang Y, Liu J, Han L, Zhao H, Wang K, Liu F, et al. Effect of blockage ratio on flow field and combustion characteristics in an integrated cavity-strut dual-mode ramjet combustor. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy. 2026. doi:10.1177/09576509261472393

BibTeX
@article{Chang2026,
  author = {Chang, Yijie and Liu, Jinhe and Han, Luyang and Zhao, Haifeng and Wang, Kaixing and Liu, Fuqiang and Mu, Yong and Xu, Gang},
  title = {Effect of blockage ratio on flow field and combustion characteristics in an integrated cavity-strut dual-mode ramjet combustor},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy},
  year = {2026},
  doi = {10.1177/09576509261472393}
}
Kostenlos starten →