CFD-based investigation of blade thickness ratio effects on pico-hydro crossflow turbine performance
Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy · 16.07.2026
DOI: 10.1177/09576509261468243 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, online erschienen am 16.07.2026. Verfasst von Dewi Puspita Sari und 9 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Gefördert von: Badan Riset dan Inovasi Nasional, Lembaga Pengelola Dana Pendidikan.
Abstract (Originalsprache)
Indonesia’s vast hydropower potential remains significantly untapped, despite the relevance of low-head water resources for decentralised rural electrification. This study investigates the effect of the blade thickness ratio (L/H) of a centre-convex upper blade profile on the hydraulic performance of a pico-hydro crossflow turbine. The novelty of this work lies in isolating L/H as a manufacturable blade-profile variable and linking its influence to velocity-triangle design, transient CFD results, benchmark comparison, and flow-field mechanisms. The numerical model was assessed through mesh independence, time-step independence, analytical benchmark comparison, and comparison with relevant literature. The reported efficiency is therefore interpreted as runner-domain hydraulic efficiency rather than complete electro-mechanical system efficiency. The optimum L/H ratio of 0.5 achieved 81.80% hydraulic efficiency and 210.07 W mechanical power at 600 rpm under a 3 m head. This performance is associated with a favourable pressure difference, smoother streamlines, and delayed separation, whereas the thickest blade (L/H of 1.5) produced stronger blockage, recirculation, and efficiency reduction to 56.31%. The results provide design guidance for locally manufacturable pico-hydro crossflow turbines and establish a basis for future prototype validation and field installation in remote Indonesian communities.
Förderung
- Badan Riset dan Inovasi Nasional
- Lembaga Pengelola Dana Pendidikan
Zitieren
APA
Sari, D. P., Ramadhania, P., Syofii, I., Prakoso, A. T., Setiyo, E., Yadi, F., Costa, A., Wadirin, Adanta, D., & Arifin, A. (2026). CFD-based investigation of blade thickness ratio effects on pico-hydro crossflow turbine performance. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy. https://doi.org/10.1177/09576509261468243
Vancouver
Sari DP, Ramadhania P, Syofii I, Prakoso AT, Setiyo E, Yadi F, et al. CFD-based investigation of blade thickness ratio effects on pico-hydro crossflow turbine performance. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy. 2026. doi:10.1177/09576509261468243
BibTeX
@article{Sari2026,
author = {Sari, Dewi Puspita and Ramadhania, Putri and Syofii, Imam and Prakoso, Akbar Teguh and Setiyo, Edi and Yadi, Farhan and Costa, Anthony and Wadirin and Adanta, Dendy and Arifin, Amir},
title = {CFD-based investigation of blade thickness ratio effects on pico-hydro crossflow turbine performance},
journal = {Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy},
year = {2026},
doi = {10.1177/09576509261468243}
}
EUVIMED