EUVIMEDEUVIMED entdecken
Crossref

Experimental validation of GO-PCM thermal management for inner-rotor BLDC motors

Aashish Sahu, Rameshreddy Prasanth Kumar, Lalhmingsanga Hauchhum

Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy · 14.07.2026

DOI: 10.1177/09576509261464090 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, online erschienen am 14.07.2026. Verfasst von Aashish Sahu und 2 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Inner-rotor brushless DC (BLDC) motors used in electric mobility, UAV propulsion, and robotics face elevated thermal stress because compact packaging restricts convective area and limits the practicality of active cooling. This work experimentally evaluates a fully passive, stator-coupled latent-heat module using paraffin phase-change material (PCM) nano-enhanced with graphene oxide (GO) to improve conduction-limited access to latent enthalpy during load transients. A 5 wt% GO loading was selected as a conductivity-enthalpy compromise, and transient hot-wire measurements confirm a ∼62% increase in effective thermal conductivity (from ≈0.25 to ≈0.40 W m −1 K −1 ) relative to neat paraffin. The GO-PCM is encapsulated in a CNC-machined aluminum enclosure sized to inner-rotor clearance and sealed via a press-fit closure with ullage to accommodate volumetric expansion and prevent leakage over melt/solidify cycling. Motor-level tests on a motor–generator rig under no-load, partial-load (∼180 W), and full-load (∼360 W) show that, at high load, the module reduces peak winding temperature rise by up to 24.4°C, extends the time to reach 80% of the baseline steady-state rise by ≈ 58%, and halves the terminal normalized rise (θ ≈ 0.5). The results provide quantitative guidance for packaging-limited BLDC drives where airflow and large fin arrays offer limited benefit.

Zitieren

APA

Sahu, A., Kumar, R. P., & Hauchhum, L. (2026). Experimental validation of GO-PCM thermal management for inner-rotor BLDC motors. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy. https://doi.org/10.1177/09576509261464090

Vancouver

Sahu A, Kumar RP, Hauchhum L. Experimental validation of GO-PCM thermal management for inner-rotor BLDC motors. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy. 2026. doi:10.1177/09576509261464090

BibTeX
@article{Sahu2026,
  author = {Sahu, Aashish and Kumar, Rameshreddy Prasanth and Hauchhum, Lalhmingsanga},
  title = {Experimental validation of GO-PCM thermal management for inner-rotor BLDC motors},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy},
  year = {2026},
  doi = {10.1177/09576509261464090}
}
Kostenlos starten →