Numerical simulation on vortex structure within a magnetic vortex pump with numerous short straight blades
Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy · 2026-11 · 240 (7) · 1360-1375
DOI: 10.1177/09576509261436870 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, online erschienen am 24.03.2026. Verfasst von Yangyang Wei und 4 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Gefördert von: Science and Technology Support Program of Taizhou.
Abstract (Originalsprache)
Due to the operational differences between vortex pumps and traditional vane pumps, complex vortex structures exist within vortex pumps. As the fluid gains mechanical energy repeatedly, the vortex also give rise to issues such as hydraulic losses, vibration, and noise. This study conducts a numerical simulation on vortex structures within a magnetic vortex pump with 56 short-straight blades on a single side and staggered blade arrangement on both sides. The numerical simulations are validated against experimental data. Based on numerical calculations, pressure pulsations and velocity pulsations within the impeller passages and casing were analyzed. Additionally, the distribution of pressure pulsation intensity, vorticity intensity, and turbulent kinetic energy dissipation at the rotor-stator interface was investigated. Finally, the vortex structures within the impeller and casing passages, along with their effects on the flow field, were analyzed in the axial, circumferential, and radial directions. Results show the numerical predictions agree well with experimental data. Influenced by the periodic evolution of vortices, velocity pulsations in the impeller and volute do not occur solely at the blade passing frequency. Circumferentially, two counter-rotating vortices exist on either side of the impeller, inducing a significantly higher velocity at the mid-section of the impeller outlet. Additionally, the vertical velocity near the blade root at the impeller inlet is bigger than that near the blade trailing edge. A radial flow separation vortex near the blade suction side creates a substantial pressure gradient from the pressure side to the suction side.
Förderung
- Science and Technology Support Program of Taizhou
Zitieren
APA
Wei, Y., Shi, X., Zhou, L., Wei, H., & Fan, Q. (2026). Numerical simulation on vortex structure within a magnetic vortex pump with numerous short straight blades. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 240(7), 1360-1375. https://doi.org/10.1177/09576509261436870
Vancouver
Wei Y, Shi X, Zhou L, Wei H, Fan Q. Numerical simulation on vortex structure within a magnetic vortex pump with numerous short straight blades. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy. 2026;240(7):1360-1375. doi:10.1177/09576509261436870
BibTeX
@article{Wei2026,
author = {Wei, Yangyang and Shi, Xiaohua and Zhou, Ling and Wei, Hongliang and Fan, Quanwang},
title = {Numerical simulation on vortex structure within a magnetic vortex pump with numerous short straight blades},
journal = {Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy},
year = {2026},
volume = {240},
number = {7},
pages = {1360--1375},
doi = {10.1177/09576509261436870}
}
EUVIMED