EUVIMEDEUVIMED entdecken
Crossref

Improving the melting performance of phase change material (PCM) in a latent heat thermal energy storage unit via a non-uniform arrangement of longitudinal fin

Bohui Lu, Yongxue Zhang, Dong Sun, Cong Wang, Zhihao Wang, Mengxi Luo

Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy · 2023-08 · 237 (5) · 1100-1112

DOI: 10.1177/09576509231156236 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, online erschienen am 05.02.2023. Verfasst von Bohui Lu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 38 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The application of latent heat thermal energy storage (LHTES) technology in solar energy utilization is greatly restricted by the low thermal conductivity of phase change material (PCM). This paper proposed a non-uniform arrangement of a longitudinal fin in a typical LHTES unit to improve the melting performance of PCM. Water is used as the heat transfer fluid (HTF) and paraffin (RT35) is selected as the PCM. A three-dimensional computational model is built to simulate the melting process of PCM, and its result is verified by experimental data. Firstly, the melting performance of PCM in the LHTES unit with four kinds of fin arrangements is comparatively studied, and its heat transfer mechanism is characterized via the maximum velocity of liquid PCM. In addition, the influences of HTF inlet temperature and flow rate, as well as heat transfer tube material on the complete melting time of three typical fin arrangements are also investigated. The results implied that the complete melting time of the non-uniform arrangement of the longitudinal fin reduces by 30.91% relative to the conventional longitudinal fin (Case 2). The results also revealed that the melting rate of PCM is related not only to the intensity of natural convection but also to the distribution of natural convection in the whole melting process.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Lu, B., Zhang, Y., Sun, D., Wang, C., Wang, Z., & Luo, M. (2023). Improving the melting performance of phase change material (PCM) in a latent heat thermal energy storage unit via a non-uniform arrangement of longitudinal fin. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 237(5), 1100-1112. https://doi.org/10.1177/09576509231156236

Vancouver

Lu B, Zhang Y, Sun D, Wang C, Wang Z, Luo M. Improving the melting performance of phase change material (PCM) in a latent heat thermal energy storage unit via a non-uniform arrangement of longitudinal fin. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy. 2023;237(5):1100-1112. doi:10.1177/09576509231156236

BibTeX
@article{Lu2023,
  author = {Lu, Bohui and Zhang, Yongxue and Sun, Dong and Wang, Cong and Wang, Zhihao and Luo, Mengxi},
  title = {Improving the melting performance of phase change material (PCM) in a latent heat thermal energy storage unit via a non-uniform arrangement of longitudinal fin},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy},
  year = {2023},
  volume = {237},
  number = {5},
  pages = {1100--1112},
  doi = {10.1177/09576509231156236}
}
Kostenlos starten →