EUVIMEDEUVIMED entdecken
Crossref

Impact loads from freight wagon wheels with two non-condemnable tread defects: Modelling, field verification, and proposals for regulatory change

Aleksandr S. Adadurov

Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit · 13.11.2026

DOI: 10.1177/09544097261505151 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, online erschienen am 13.11.2026. Verfasst von Aleksandr S. Adadurov. Die Arbeit nennt 16 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wayside train monitoring systems based on measuring wheel–rail impact forces often register loads exceeding regulatory limits from wheels on which visual inspection finds only defects below the condemning size limits. This paper shows that such readings can be caused by the combined action of two or more non-condemnable tread defects. An impact interaction model built on A. Ya. Kogan’s theory, with the track represented as a beam on a Winkler elastic foundation, is adapted to several consecutively located defects using the time-delay theorem. Calculations are compared with data from the NEVA wayside monitoring system installed at Veimarn station of the Oktyabrskaya Railway (Russia). The medians of measured loads for wheels with double non-condemnable defects and for wheels with single condemnable defects are comparable in the examined groups of four and five wheels, differing by 9% with fully overlapping ranges. For wheelsets with inspection records, a response inversion is found, in which non-condemnable defects with sharp edges produce a larger signal in the 250–350 Hz diagnostic band than a large condemnable defect with a gently sloping entry, while the superposition of impact pulses from closely spaced defects can lead to a condemnable wheel being missed. The results agree with independent European studies favouring a force-based removal criterion over a geometric one. A closed-form classification of the interaction regimes of two defects is given through the flight length of the wheel, and the criterion is generalised to bogies of different design. For the 18-9855 bogie with a 25 t axle load, the inertial decoupling of the side frame reduces the effective impact mass from 926 to 725 kg, so that the track impact at the condemning flat depth is about 7% lower than for the 18–100 bogie despite the higher axle load, and the equivalent condemning depth is about 1.3 mm.

Zitieren

APA

Adadurov, A. S. (2026). Impact loads from freight wagon wheels with two non-condemnable tread defects: Modelling, field verification, and proposals for regulatory change. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit. https://doi.org/10.1177/09544097261505151

Vancouver

Adadurov AS. Impact loads from freight wagon wheels with two non-condemnable tread defects: Modelling, field verification, and proposals for regulatory change. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit. 2026. doi:10.1177/09544097261505151

BibTeX
@article{Adadurov2026,
  author = {Adadurov, Aleksandr S.},
  title = {Impact loads from freight wagon wheels with two non-condemnable tread defects: Modelling, field verification, and proposals for regulatory change},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit},
  year = {2026},
  doi = {10.1177/09544097261505151}
}
Kostenlos starten →