EUVIMEDEUVIMED entdecken
Crossref

Longitudinal stability and state evolution analysis of ballasted track in steep-slope rack railway

Jiongli Wang, Chunfa Zhao, Zhixian Chen, Jun Fang, Zhihui Chen, Jizhong Yang, Zaigang Chen

Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit · 2026-11 · 240 (10) · 1280-1293

DOI: 10.1177/09544097261471215 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, online erschienen am 23.07.2026. Verfasst von Jiongli Wang und 6 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Gefördert von: Sichuan Science and Technology Program, Open Research Fund of the State Key Laboratory of Rail Transit Vehicle System.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address ballast bed sliding and structural instability in rack railways operating on steep gradients, this study developed a coupled Multi-Flexible-Body Dynamics–Discrete Element Method (MFBD-DEM) model to investigate the mechanism by which an enhanced steel sleeper improves the longitudinal stability of ballasted track. Cyclic train loading was further applied to the DEM ballast bed model to simulate the evolution of track condition over the service period. The results show that increasing gradient weakens the longitudinal load-carrying capacity of the ballast bed, whereas the enhanced sleeper improves both longitudinal and lateral track stability by strengthening the sleeper–ballast interface constraint. Further analysis indicates that ballast particles undergo continuous migration under the combined action of downslope gravity and dynamic loading, leading to thinning of the upper ballast bed and an increased risk of local track deformation. Increasing the initial compactness level of the ballast bed effectively reduces particle mobility, thereby mitigating structural settlement and enhancing overall stability. Based on the analysis, the ballast bed density prior to commissioning of lines with a 480‰ gradient should not be lower than 1.67 g/cm 3 , and it is recommended to maintain a density of 1.70 g/cm 3 or above. This recommended value is also expected to satisfy the operational requirements of rack railway lines with lower gradients.

Förderung

  • Sichuan Science and Technology Program
  • Open Research Fund of the State Key Laboratory of Rail Transit Vehicle System

Zitieren

APA

Wang, J., Zhao, C., Chen, Z., Fang, J., Chen, Z., Yang, J., & Chen, Z. (2026). Longitudinal stability and state evolution analysis of ballasted track in steep-slope rack railway. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 240(10), 1280-1293. https://doi.org/10.1177/09544097261471215

Vancouver

Wang J, Zhao C, Chen Z, Fang J, Chen Z, Yang J, et al. Longitudinal stability and state evolution analysis of ballasted track in steep-slope rack railway. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit. 2026;240(10):1280-1293. doi:10.1177/09544097261471215

BibTeX
@article{Wang2026,
  author = {Wang, Jiongli and Zhao, Chunfa and Chen, Zhixian and Fang, Jun and Chen, Zhihui and Yang, Jizhong and Chen, Zaigang},
  title = {Longitudinal stability and state evolution analysis of ballasted track in steep-slope rack railway},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit},
  year = {2026},
  volume = {240},
  number = {10},
  pages = {1280--1293},
  doi = {10.1177/09544097261471215}
}
Kostenlos starten →