EUVIMEDEUVIMED entdecken
Crossref

FE simulation model of high-speed rail milling

Ashok Ambig, Wilhelm Kubin, Werner Daves, Thomas Klünsner, Thomas Antretter

Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit · 2026-11 · 240 (10) · 1238-1253

DOI: 10.1177/09544097261468397 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, online erschienen am 08.07.2026. Verfasst von Ashok Ambig und 4 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Gefördert von: the COMET programme within the K2 Center.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research extends the application of an Arbitrary Lagrangian-Eulerian (ALE)-based finite element simulation model specifically designed to analyze high-speed milling processes in rail milling, emphasizing the dynamics of chip formation and the stress and temperature distributions within the milled workpiece. The study primarily investigates milling operations at two cutting speeds: 240 m/min, where results are validated against experimental data, and 380 m/min, which offers new insights into the material behavior under high-speed milling conditions. The evaluation critically assesses the capability of the model in predicting material flow, residual stress fields and heat distribution, aligning these predictions with experimental observations. The findings demonstrate the robustness of the numerical model in simulating complex physical phenomena specific to high-speed milling.

Förderung

  • the COMET programme within the K2 Center

Zitieren

APA

Ambig, A., Kubin, W., Daves, W., Klünsner, T., & Antretter, T. (2026). FE simulation model of high-speed rail milling. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 240(10), 1238-1253. https://doi.org/10.1177/09544097261468397

Vancouver

Ambig A, Kubin W, Daves W, Klünsner T, Antretter T. FE simulation model of high-speed rail milling. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit. 2026;240(10):1238-1253. doi:10.1177/09544097261468397

BibTeX
@article{Ambig2026,
  author = {Ambig, Ashok and Kubin, Wilhelm and Daves, Werner and Klünsner, Thomas and Antretter, Thomas},
  title = {FE simulation model of high-speed rail milling},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit},
  year = {2026},
  volume = {240},
  number = {10},
  pages = {1238--1253},
  doi = {10.1177/09544097261468397}
}
Kostenlos starten →