EUVIMEDEUVIMED entdecken
Crossref

Understanding the impact of emulated initial rail roughness on traction performance under constant tribomachine testing conditions

Maksym Spiryagin, Mohammad Lutfar Rahaman, Esteban Bernal, Qing Wu, Colin Cole, Haohao Ding, Shuyue Zhang, Wenjian Wang

Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit · 2026-11 · 240 (10) · 1254-1267

DOI: 10.1177/09544097261467503 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, online erschienen am 07.07.2026. Verfasst von Maksym Spiryagin und 7 weiteren Autor:innen. Die Arbeit nennt 72 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study used a twin-disc test under locomotive traction tribological conditions to investigate how initial surface roughness influences the traction coefficient at the wheel-rail interface. We propose functions to describe the evolution of disc surface roughness. The findings show that the initial roughness of the rail disc significantly impacted both traction coefficients and wear. Roughness values were selected based on measurements from a Western Australian freight line where tracks are subject to high tractive and dynamic braking efforts. Specifically, the wheel disc roughness was set at Ra = 1 μm for all samples, while the rail disc roughness values were set at Ra = 1 μm, 5 μm, and 10 μm. Experimental results revealed significantly different traction curves for each wheel-rail combination. Compared to the smoother 1 μm rail disc, the rougher discs (5 μm and 10 μm) exhibited a slower, linear increase in the traction coefficient before reaching a steady state. Notably, the 10 μm rail disc resulted in longer running-in periods, lower overall traction coefficients, and higher wear rates. This is attributed to the fact that contact asperities deformed plastically and were more easily removed during rolling/sliding. As a result, traction coefficients became similar for all tests following the running-in period.

Zitieren

APA

Spiryagin, M., Rahaman, M. L., Bernal, E., Wu, Q., Cole, C., Ding, H., Zhang, S., & Wang, W. (2026). Understanding the impact of emulated initial rail roughness on traction performance under constant tribomachine testing conditions. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 240(10), 1254-1267. https://doi.org/10.1177/09544097261467503

Vancouver

Spiryagin M, Rahaman ML, Bernal E, Wu Q, Cole C, Ding H, et al. Understanding the impact of emulated initial rail roughness on traction performance under constant tribomachine testing conditions. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit. 2026;240(10):1254-1267. doi:10.1177/09544097261467503

BibTeX
@article{Spiryagin2026,
  author = {Spiryagin, Maksym and Rahaman, Mohammad Lutfar and Bernal, Esteban and Wu, Qing and Cole, Colin and Ding, Haohao and Zhang, Shuyue and Wang, Wenjian},
  title = {Understanding the impact of emulated initial rail roughness on traction performance under constant tribomachine testing conditions},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit},
  year = {2026},
  volume = {240},
  number = {10},
  pages = {1254--1267},
  doi = {10.1177/09544097261467503}
}
Kostenlos starten →