Wheel-rail adhesion utilization in the presence of wide-wave track irregularities
Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit · 10.07.2026
DOI: 10.1177/09544097261467449 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, online erschienen am 10.07.2026. Verfasst von Shuangchao Huang und 4 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Open and Cooperative Fund of the High Speed Wheel-Rail System Laboratory of NELHSR.
Abstract (Originalsprache)
In railway vehicles, wheel-rail adhesion utilization follows a static design with redundancy, yet its dynamic characteristics under realistic operating conditions remain poorly understood. This study quantifies adhesion utilization in the presence of track irregularities by developing a high-speed train-track coupled dynamics model and a wheel-rail transient contact finite element model. Mid/long-wave irregularities are simulated using power spectrum density, while short-wave irregularities are considered as the critical rail corrugation, rail weld and wheel flat. The analysis focuses on operations on the tangent track under dry and wet conditions, with speeds up to 400 km/h during full-acceleration traction or urgent braking. For single-type irregularities, adhesion utilization remains below 0.3 under dry conditions but can reach 1.0 under wet conditions, indicating occurrences of low adhesion (LA) or dynamic low adhesion (DLA). This is attributed to irregularity-induced normal unloading, axle load transfer, or the mismatch between high adhesion demands and low adhesion coefficients. The maximum allowable operating modes are further determined to avoid LA and DLA. Additionally, adhesion utilization is analyzed in scenarios involving the coexistence of mid/long-wave and short-wave irregularities, as well as on typical curved and sloped tracks, and with the use of adhesion design limits.
Förderung
- National Natural Science Foundation of China
- Open and Cooperative Fund of the High Speed Wheel-Rail System Laboratory of NELHSR
Zitieren
APA
Huang, S., Geng, C., Zhao, X., Cai, Y., & Wen, Z. (2026). Wheel-rail adhesion utilization in the presence of wide-wave track irregularities. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit. https://doi.org/10.1177/09544097261467449
Vancouver
Huang S, Geng C, Zhao X, Cai Y, Wen Z. Wheel-rail adhesion utilization in the presence of wide-wave track irregularities. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit. 2026. doi:10.1177/09544097261467449
BibTeX
@article{Huang2026,
author = {Huang, Shuangchao and Geng, Chen and Zhao, Xin and Cai, Yuanwu and Wen, Zefeng},
title = {Wheel-rail adhesion utilization in the presence of wide-wave track irregularities},
journal = {Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit},
year = {2026},
doi = {10.1177/09544097261467449}
}
EUVIMED