Effects of infill pattern and infill density on the mechanical and sensing performance of direct ink writing three-dimensional-printed flexible strain sensors
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 18.11.2026
DOI: 10.1177/09544089261509288 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 18.11.2026. Verfasst von Zelong Zhao und 2 weiteren Autor:innen. Die Arbeit nennt 57 Literaturangaben. Gefördert von: China Postdoctoral Science Foundation, National Natural Science Foundation of China.
Abstract (Originalsprache)
Direct ink writing three-dimensional printing provides a versatile platform for fabricating flexible multi-functional polymer materials, helping to balance the requirements of flexible strain sensors, including sensitivity, sensing range, and printability. In this work, a polydimethylsiloxane/carbon nanotube composite flexible strain sensor is developed using direct ink writing three-dimensional printing. The effects of carbon nanotube content (2–10 wt.%) on rheology and printability are investigated, and the mechanical and sensing performances of three infill patterns (grid, spiral, and honeycomb) are evaluated at three infill densities (30%, 40%, and 50%). Combining finite element simulations with experiments, 6 wt.% carbon nanotubes are identified as the optimal composition, balancing conductivity and printability. The grid pattern shows the best mechanical performance (maximum force of 17.2 N and displacement of 47.46 mm), while the spiral structure provides the most stable resistance signal. The grid structure is most sensitive to infill density: increasing infill density from 30% to 50% expands the strain range from 25% to 80% and increases the relative resistance change from 30% to 150%. The spiral and honeycomb structures exhibit a decreasing gauge factor with increasing infill density, whereas the grid structure reaches a peak gauge factor of 4.05 at 40% infill density. This study provides theoretical and experimental support for tailoring the structure–property relationship of direct ink writing printed flexible sensors.
Förderung
- China Postdoctoral Science Foundation
- National Natural Science Foundation of China
Zitieren
APA
Zhao, Z., Wang, Z., & Tang, Y. (2026). Effects of infill pattern and infill density on the mechanical and sensing performance of direct ink writing three-dimensional-printed flexible strain sensors. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089261509288
Vancouver
Zhao Z, Wang Z, Tang Y. Effects of infill pattern and infill density on the mechanical and sensing performance of direct ink writing three-dimensional-printed flexible strain sensors. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2026. doi:10.1177/09544089261509288
BibTeX
@article{Zhao2026,
author = {Zhao, Zelong and Wang, Zhaogui and Tang, Yu},
title = {Effects of infill pattern and infill density on the mechanical and sensing performance of direct ink writing three-dimensional-printed flexible strain sensors},
journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
year = {2026},
doi = {10.1177/09544089261509288}
}
EUVIMED