EUVIMEDEUVIMED entdecken
Crossref

Fabrication of vanadium carbide-reinforced SS316–EWAC composite castings using microwave hybrid heating

Jatinder Pal, Sarbjeet Kaushal, Palak, Dheeraj Gupta, TP Singh

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 20.11.2026

DOI: 10.1177/09544089261508389 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 20.11.2026. Verfasst von Jatinder Pal und 4 weiteren Autor:innen. Die Arbeit nennt 52 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Microwave material processing has emerged as an advanced and energy efficient manufacturing technique owing to its rapid volumetric heating, shorter processing time, and eco-friendly nature. In the present investigation, SS316 + 15%EWAC + x VC ( x = 3, 5, and 10%) metal-ceramic composite castings were successfully developed using microwave hybrid heating operating at 2.45 GHz and 900 W. The developed composites were characterized using metallurgical (scanning electron microscopy/energy-dispersive spectroscopy, X-ray diffraction), mechanical (Vicker's microhardness), and tribological analyses using scanning electron microscopy/energy-dispersive spectroscopy, X-ray diffraction, Vicker's microhardness testing, and pin-on-disk wear testing. Microstructure study revealed that the uniform melting of SS316 matrix material with random dispersion of vanadium carbide-reinforced particles throughout the composite X-ray diffraction analysis confirmed the formation and presence of hard carbide phases, which significantly contributed to the microhardness enhancement. The Vicker's hardness of the composite increased progressively with vanadium carbide content and the maximum microhardness of 690.13 ± 245.16 HV was achieved for the SS316 + 15EWAC + 10VC cast. Tribological study results revealed that wear resistance of the cast sample improved considerably with increasing vanadium carbide reinforcement content. The minimum cumulative weight loss was observed for the SS316 + 15EWAC + 10VC at 1 m/s of sliding velocity and 2 kg of normal load. Scanning electron microscopy-based fractographical analysis of the worn surface indicated a transition in wear mechanism from severe adhesive-abrasive wear to mild oxidative wear with increasing vanadium carbide content.

Zitieren

APA

Pal, J., Kaushal, S., Palak, Gupta, D., & Singh, T. (2026). Fabrication of vanadium carbide-reinforced SS316–EWAC composite castings using microwave hybrid heating. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089261508389

Vancouver

Pal J, Kaushal S, Palak, Gupta D, Singh T. Fabrication of vanadium carbide-reinforced SS316–EWAC composite castings using microwave hybrid heating. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2026. doi:10.1177/09544089261508389

BibTeX
@article{Pal2026,
  author = {Pal, Jatinder and Kaushal, Sarbjeet and Palak and Gupta, Dheeraj and Singh, TP},
  title = {Fabrication of vanadium carbide-reinforced SS316–EWAC composite castings using microwave hybrid heating},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
  year = {2026},
  doi = {10.1177/09544089261508389}
}
Kostenlos starten →