Effect of molten salt and air on the high-temperature corrosion of PCGTAW alloy 625 weldments
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 20.11.2026
DOI: 10.1177/09544089261507591 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 20.11.2026. Verfasst von Selvarajan Sujai und 8 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben.
Abstract (Originalsprache)
In this study, the high-temperature corrosion behavior of the pulsing current gas tungsten arc welded (PCGTAW) Alloy 625 fabricated with ERNiCrCoMo-2 filler was evaluated at 700 °C in a molten K 2 SO 4 –60%NaCl salt mixture and in an air atmosphere. The microstructure analysis of the weldment shows the existence of columnar and cellular dendrites in the weld region. The weight gains of the air-oxidized and corroded weldments are 0.236 and 1.413 mg/cm 2 , respectively. The surface microstructure and oxide phases of the thermally exposed weldments were examined. The test results revealed that the weldment was more prone to spallation and higher oxidation in molten salt conditions due to sulfidation and chlorination. Minimal oxidation and minimal failure were observed in the air oxidation environment. Furthermore, a complex corrosion mechanism was derived for the alloy-weld region based on its composition and microstructure.
Zitieren
APA
Sujai, S., Prabu, S., Muthu, S. M., Sathishkumar, M., Arunkumar, D. T., Bharathi, S., Nallathambi, K., Karthikeyan, S., & Vignesh, M. (2026). Effect of molten salt and air on the high-temperature corrosion of PCGTAW alloy 625 weldments. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089261507591
Vancouver
Sujai S, Prabu S, Muthu SM, Sathishkumar M, Arunkumar DT, Bharathi S, et al. Effect of molten salt and air on the high-temperature corrosion of PCGTAW alloy 625 weldments. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2026. doi:10.1177/09544089261507591
BibTeX
@article{Sujai2026,
author = {Sujai, Selvarajan and Prabu, Senthur and Muthu, Shanmugam Mannan and Sathishkumar, Mathiyazhagan and Arunkumar, Devalapura Thimmappa and Bharathi, Sundara and Nallathambi, Kaliamoorthi and Karthikeyan, Selvaraj and Vignesh, Margabandu},
title = {Effect of molten salt and air on the high-temperature corrosion of PCGTAW alloy 625 weldments},
journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
year = {2026},
doi = {10.1177/09544089261507591}
}
EUVIMED