Investigation of the microstructure and mechanical properties of duplex stainless steel and AISI 4140 steel joined by the diffusion bonding method using MBF-51 interlayer
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 18.11.2026
DOI: 10.1177/09544089261507169 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 18.11.2026. Verfasst von Bekir Güney und 2 weiteren Autor:innen. Die Arbeit nennt 55 Literaturangaben. Gefördert von: Scientific Research Projects Commission of Karamanoğlu Mehmetbey University.
Abstract (Originalsprache)
In this study, AISI 4140 low-alloy steel and duplex stainless steel were joined using a diffusion welding method with an MBF-51-based amorphous nickel interlayer. The effects of diffusion temperature (1000, 1050, and 1100 °C) and holding time (30 and 60 minutes) on the microstructure and mechanical properties of the weld zone were investigated. The obtained samples were characterized by optical microscopy, SEM/EDS, and XRD analyses; the microhardness distribution of the weld zone was also determined, and shear strength tests were performed. Microstructure examinations showed that increasing temperature and holding time significantly improved elemental diffusion between the interlayer and the base materials, resulting in a more homogeneous weld zone. XRD analyses revealed the formation of α-Fe, γ-Ni (Fe–Ni solid solution), Ni 3 B, Ni 3 Si, CrB, Cr 2 B, Cr 3 C 2 , and Ni 3 C phases in the diffusion zone. Microhardness measurements revealed that the interlayer hardness reached higher values than the base materials due to the boride and carbide phases formed in the diffusion zone. Shear strength results showed that the bond strength continuously increased with increasing diffusion temperature and holding time; the highest shear strength was obtained in the sample held at 1100 °C for 60 minutes. In conclusion, it was determined that the MBF-51 interlayer successfully joined AISI 4140 steel and duplex stainless steel by diffusion welding, and that the 1100 °C/60 minute process parameters were the most suitable conditions in terms of microstructural integrity and mechanical performance.
Förderung
- Scientific Research Projects Commission of Karamanoğlu Mehmetbey University
Zitieren
APA
Güney, B., Dal, S., & Kurt, B. (2026). Investigation of the microstructure and mechanical properties of duplex stainless steel and AISI 4140 steel joined by the diffusion bonding method using MBF-51 interlayer. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089261507169
Vancouver
Güney B, Dal S, Kurt B. Investigation of the microstructure and mechanical properties of duplex stainless steel and AISI 4140 steel joined by the diffusion bonding method using MBF-51 interlayer. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2026. doi:10.1177/09544089261507169
BibTeX
@article{Gney2026,
author = {Güney, Bekir and Dal, Serkan and Kurt, Bülent},
title = {Investigation of the microstructure and mechanical properties of duplex stainless steel and AISI 4140 steel joined by the diffusion bonding method using MBF-51 interlayer},
journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
year = {2026},
doi = {10.1177/09544089261507169}
}
EUVIMED