EUVIMEDEUVIMED entdecken
Crossref

Optimization of a rotationally staggered multistage orifice plate for low noise throttling

Wei Jin, Runlin Gan, Baoren Li

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 29.10.2026

DOI: 10.1177/09544089261502675 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 29.10.2026. Verfasst von Wei Jin und 2 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Gefördert von: Fundamental Research Funds for the Central Universities.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Multistage orifice plates are widely used for pressure reduction and flow regulation, but conventional coaxial designs can lead to concentrated jets, local low-pressure regions, cavitation risk, and flow-induced noise. To improve throttling performance while reducing noise, a rotationally staggered multistage orifice plate is proposed, in which the holes in adjacent plates are circumferentially offset by a fixed angle. A numerical model based on the SST k – ω turbulence model is established and validated against experimental data, achieving a pressure drop error of less than 10%. The staggered arrangement is compared with conventional coaxial structures, demonstrating enhanced pressure-reduction capability and reduced low-pressure regions. An optimization framework combining Latin hypercube sampling, Spearman correlation analysis, surrogate modeling, and non-dominated sorting genetic algorithm II (NSGA-II) is developed. Compared with the original staggered structure, the optimized design maintains the required pressure drop, reduces the low-pressure magnitude by 12.0%, and decreases the maximum velocity by 3.37%. These results demonstrate the potential of the proposed design as a passive strategy for reducing noise in multistage throttling components.

Förderung

  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Jin, W., Gan, R., & Li, B. (2026). Optimization of a rotationally staggered multistage orifice plate for low noise throttling. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089261502675

Vancouver

Jin W, Gan R, Li B. Optimization of a rotationally staggered multistage orifice plate for low noise throttling. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2026. doi:10.1177/09544089261502675

BibTeX
@article{Jin2026,
  author = {Jin, Wei and Gan, Runlin and Li, Baoren},
  title = {Optimization of a rotationally staggered multistage orifice plate for low noise throttling},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
  year = {2026},
  doi = {10.1177/09544089261502675}
}
Kostenlos starten →