EUVIMEDEUVIMED entdecken
Crossref

A finite element simulation-based framework for constructing performance envelope curves of downhole safety valves

Xiao-hui Jiang, Yang Tang, Hai-bo Yan, Guo-hai Yuan, Xiang Gao, Jin-zhong Wang, Jian-fei Wei

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 28.10.2026

DOI: 10.1177/09544089261502286 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 28.10.2026. Verfasst von Xiao-hui Jiang und 6 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Gefördert von: the National Science and Technology Major Project, the Natural Science Foundation of Sichuan Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Downhole safety valves are critical well-control barriers in completion strings and are exposed to coupled axial loads and internal and external pressures during running-in-hole, packer setting, acid fracturing, production, and shut-in operations. However, a unified approach for defining their load-bearing boundaries under these conditions remains unavailable. This study develops a finite element simulation-based framework for constructing four-quadrant performance envelopes of downhole safety valves. A three-dimensional full-valve model was established for the Realm-16.75 tubing-retrievable downhole safety valve. Critical components, material properties, boundary conditions, and the onset-of-yield criterion were defined, and stepwise loading was applied under single and combined loads. The predicted single-load limits were 3320 kN in tension, 2995 kN in compression, 190 MPa under internal pressure, and 148 MPa under external pressure. Eleven combined-load boundary points were then used to form a closed performance envelope. Load–operation tests on a comparable tubing-retrievable downhole safety valve showed changes of +0.50% and −7.66% in the mean hydraulic control pressures at the fully open and fully closed states, respectively, with no leakage or structural damage. Field-condition assessment showed that all operating points from two representative wells remained within the safe operating domain; the corresponding maximum von Mises stresses were 618.2 and 650.2 MPa, both below the Alloy 718 yield strength. The proposed framework provides a unified basis for structural design, valve selection, and field safety assessment.

Förderung

  • the National Science and Technology Major Project
  • the Natural Science Foundation of Sichuan Province

Zitieren

APA

Jiang, X., Tang, Y., Yan, H., Yuan, G., Gao, X., Wang, J., & Wei, J. (2026). A finite element simulation-based framework for constructing performance envelope curves of downhole safety valves. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089261502286

Vancouver

Jiang X, Tang Y, Yan H, Yuan G, Gao X, Wang J, et al. A finite element simulation-based framework for constructing performance envelope curves of downhole safety valves. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2026. doi:10.1177/09544089261502286

BibTeX
@article{Jiang2026,
  author = {Jiang, Xiao-hui and Tang, Yang and Yan, Hai-bo and Yuan, Guo-hai and Gao, Xiang and Wang, Jin-zhong and Wei, Jian-fei},
  title = {A finite element simulation-based framework for constructing performance envelope curves of downhole safety valves},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
  year = {2026},
  doi = {10.1177/09544089261502286}
}
Kostenlos starten →