Influence of material and thickness stacking on ultrasonic-assisted rectangular clinched joints of steel and aluminum alloys
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 29.07.2026
DOI: 10.1177/09544089261471860 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 29.07.2026. Verfasst von Ji Ma und 2 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Gefördert von: Supported By Postgraduate Innovative Project of Central South University, the Project of State Key Laboratory of Metal Extrusion and Forging Equipment Technology, the Scientific Research Fund of Hunan Provincial Education Department.
Abstract (Originalsprache)
This study investigates the effects of material stacking and thickness configuration on the mechanical performance and failure modes of ultrasonic-assisted rectangular clinched joints. Experiments were conducted under fixed ultrasonic parameters of 20 kHz frequency and 7.11 µm amplitude, comparing five material stacking arrangements and two thickness configurations. The results show that positioning higher yield strength materials, such as 22MnB5 or AA6063, as the upper sheet significantly enhances joint strength. Specifically, the shear load of the joint with a 22MnB5 upper sheet and AA5052 lower sheet reaches 2.16 times that of the reverse stacking configuration, while the joint with an AA6063 upper sheet and AA5052 lower sheet exhibits a 12.7% higher shear load compared to its reverse counterpart; regarding thickness configurations, the upper-thick and lower-thin arrangement designated as 2.5U-1.5D demonstrates superior shear performance with pull-out failure, whereas the upper-thin and lower-thick arrangement designated as 1.5U-2.5D exhibits superior tensile performance characterized by interlock and bottom fracture. Fractographic analysis reveals stress-state-dependent features, with equiaxed dimples observed in tensile stress regions and U-shaped indentations in shear stress regions, both characteristic of ultrasonic-assisted ductile fracture. These findings provide direct guidance for ultrasonic-assisted rectangular clinching applications involving similar material systems and thickness scales.
Förderung
- Supported By Postgraduate Innovative Project of Central South University
- the Project of State Key Laboratory of Metal Extrusion and Forging Equipment Technology
- the Scientific Research Fund of Hunan Provincial Education Department
- Hunan Provincial Natural Science Foundation
- Central South University Innovation-Driven Research Programme
- National Natural Science Foundation of China
Zitieren
APA
Ma, J., Zhang, X., & Chen, C. (2026). Influence of material and thickness stacking on ultrasonic-assisted rectangular clinched joints of steel and aluminum alloys. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089261471860
Vancouver
Ma J, Zhang X, Chen C. Influence of material and thickness stacking on ultrasonic-assisted rectangular clinched joints of steel and aluminum alloys. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2026. doi:10.1177/09544089261471860
BibTeX
@article{Ma2026,
author = {Ma, Ji and Zhang, Xingang and Chen, Chao},
title = {Influence of material and thickness stacking on ultrasonic-assisted rectangular clinched joints of steel and aluminum alloys},
journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
year = {2026},
doi = {10.1177/09544089261471860}
}
EUVIMED