EUVIMEDEUVIMED entdecken
Crossref

Influence of heat input on droplet transfer process, microstructure, and mechanical properties during underwater submerged arc welding

Mingxuan Wang, Lijian Wu, Yanfei Han, Zhiwei Zhang, Chuanbao Jia, Sergii Maksymov, Chuansong Wu

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 21.07.2026

DOI: 10.1177/09544089261470533 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 21.07.2026. Verfasst von Mingxuan Wang und 6 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Shandong Provincial Science Foundation for Distinguished Young Scholars, National Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Underwater welding has become increasingly important with the rapid development of marine resource exploitation and offshore engineering. In this study, underwater submerged arc welding was performed on X65 pipeline steel. Different heat inputs were obtained by varying the welding current under constant voltage and welding speed conditions, and the effects of heat input on droplet transfer behavior, arc stability, weld microstructure, and mechanical properties were systematically investigated. The results show that increasing heat input significantly altered the droplet transfer behavior during underwater submerged arc welding. The fraction of globular repelled transfer decreased progressively, while the proportion of surface tension transfer increased from 5.3% to 11.5%. In addition, the droplet transfer period was shortened, and the droplet diameter increased. Sound welds were obtained under all tested heat input conditions. However, significant microstructural evolutions were observed with the increase of heat input. The fraction of acicular ferrite gradually decreased, while the contents of bulk ferrites and side-plate ferrite increased, accompanied by continuous grain coarsening. Such microstructural changes resulted in a gradual deterioration of the mechanical properties, including ultimate tensile strength and impact toughness, with increasing heat input.

Förderung

  • National Natural Science Foundation of China
  • Shandong Provincial Science Foundation for Distinguished Young Scholars
  • National Key Research and Development Program of China

Zitieren

APA

Wang, M., Wu, L., Han, Y., Zhang, Z., Jia, C., Maksymov, S., & Wu, C. (2026). Influence of heat input on droplet transfer process, microstructure, and mechanical properties during underwater submerged arc welding. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089261470533

Vancouver

Wang M, Wu L, Han Y, Zhang Z, Jia C, Maksymov S, et al. Influence of heat input on droplet transfer process, microstructure, and mechanical properties during underwater submerged arc welding. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2026. doi:10.1177/09544089261470533

BibTeX
@article{Wang2026,
  author = {Wang, Mingxuan and Wu, Lijian and Han, Yanfei and Zhang, Zhiwei and Jia, Chuanbao and Maksymov, Sergii and Wu, Chuansong},
  title = {Influence of heat input on droplet transfer process, microstructure, and mechanical properties during underwater submerged arc welding},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
  year = {2026},
  doi = {10.1177/09544089261470533}
}
Kostenlos starten →