A predictive model for frictional pressure loss reduction in laminar pipe flow based on surface wettability and slip length
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 17.07.2026
DOI: 10.1177/09544089261468943 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 17.07.2026. Verfasst von Bekir Dogan. Die Arbeit nennt 25 Literaturangaben.
Abstract (Originalsprache)
The classical no-slip boundary condition is widely adopted in internal flow analyses, although hydrophobic surfaces can induce measurable slip at the fluid–solid interface. This study presents a computational investigation and predictive modeling of frictional pressure loss reduction in laminar pipe flow as a function of surface wettability. A three-dimensional circular pipe (D = 4 mm, L/D = 100) is analyzed for Reynolds numbers between 400 and 1600. Partial slip boundary conditions are implemented via a user-defined function, where slip length is systematically varied in relation to the contact angle. The results show that increasing slip length leads to a consistent decrease in pressure drop, with a maximum reduction of approximately 1.1% at the highest slip condition. Although the magnitude is modest, the trend is systematic across all Reynolds numbers. A dimensionless analysis demonstrates that the normalized pressure drop exhibits an excellent collapse onto a nearly single curve when expressed as a function of the slip length-to-diameter ratio, indicating that the dominant governing parameter is the dimensionless slip length. Based on the numerical data, an empirical correlation is proposed to predict pressure-drop reduction, exhibiting an almost linear dependence on the slip-length ratio. In addition, an exponential relationship between the contact angle and the slip length is established. By combining these relationships, a design-oriented parametric framework is developed that estimates frictional pressure loss through a prescribed contact angle-dependent slip-length approximation. The proposed framework provides a rapid parametric engineering estimate of hydrophobic slip effects in internal flows within the investigated parameter range.
Zitieren
APA
Dogan, B. (2026). A predictive model for frictional pressure loss reduction in laminar pipe flow based on surface wettability and slip length. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089261468943
Vancouver
Dogan B. A predictive model for frictional pressure loss reduction in laminar pipe flow based on surface wettability and slip length. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2026. doi:10.1177/09544089261468943
BibTeX
@article{Dogan2026,
author = {Dogan, Bekir},
title = {A predictive model for frictional pressure loss reduction in laminar pipe flow based on surface wettability and slip length},
journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
year = {2026},
doi = {10.1177/09544089261468943}
}
EUVIMED