Experimental study of stress–strain and failure modes of adhesively bonded hybrid sisal–glass reinforced HDPE composite for automobile side body panel applications
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 30.06.2026
DOI: 10.1177/09544089261461301 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 30.06.2026. Verfasst von Samuel Tesfaye Molla und 4 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben.
Abstract (Originalsprache)
This study presents the first systematic experimental evaluation of adhesively bonded steel-to-hybrid natural sisal–glass fiber reinforced high-density polyethylene composite joints for automotive side body panel applications. Single-lap tensile and lap-shear tests were performed on joints with varying fiber–matrix ratios, adhesive thicknesses (0.2–1.0 mm), overlap geometries, and surface conditions. The results show that hybrid sisal–glass reinforcement significantly improves joint strength and stiffness: the ultimate tensile strength reached 62–68 MPa, and the optimal shear strength was 10.5–11.8 MPa at adhesive thicknesses of 0.2–0.5 mm. Simulated environmental exposure (water immersion and elevated temperature) reduced shear strength by 35–45% due to interfacial degradation and matrix plasticization. Failure mode analysis revealed a shift from predominantly cohesive failures to mixed adhesive–cohesive modes under harsher conditions and varied overlap geometries. These findings establish quantitative design guidelines for lightweight, sustainable automotive body panels using recyclable sisal–glass hybrid composites. The results demonstrate that such joints can meet strength requirements while reducing weight and material costs.
Zitieren
APA
Molla, S. T., Tsegaw, A. A., Bogale, T. M., Ali, A. N., & Abebe, A. T. (2026). Experimental study of stress–strain and failure modes of adhesively bonded hybrid sisal–glass reinforced HDPE composite for automobile side body panel applications. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089261461301
Vancouver
Molla ST, Tsegaw AA, Bogale TM, Ali AN, Abebe AT. Experimental study of stress–strain and failure modes of adhesively bonded hybrid sisal–glass reinforced HDPE composite for automobile side body panel applications. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2026. doi:10.1177/09544089261461301
BibTeX
@article{Molla2026,
author = {Molla, Samuel Tesfaye and Tsegaw, Assefa Asmare and Bogale, Teshome Mulatie and Ali, Addisu Negash and Abebe, Asmamaw Tegegne},
title = {Experimental study of stress–strain and failure modes of adhesively bonded hybrid sisal–glass reinforced HDPE composite for automobile side body panel applications},
journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
year = {2026},
doi = {10.1177/09544089261461301}
}
EUVIMED