EUVIMEDEUVIMED entdecken
Crossref

Magnetorheological finishing of hydraulic spool valves for leakage control and performance improvement

Manpreet Singh

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 06.06.2026

DOI: 10.1177/09544089261457460 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 06.06.2026. Verfasst von Manpreet Singh. Die Arbeit nennt 27 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hydraulic spool valves operate under micrometer-scale clearances, where surface integrity directly governs leakage, friction, and system efficiency. Conventional finishing methods such as grinding, honing, and lapping are often insufficient to achieve the ultra-smooth surfaces required for high-performance applications. In this study, magnetorheological (MR) finishing was applied as a deterministic surface engineering technique using a magnetically controlled flexible abrasive interface for uniform, damage-free material removal. The process reduced surface roughness from 0.32 µm to 0.020 µm (∼93% improvement) and increased microhardness by ∼4.22%, indicating enhanced load-bearing capacity. These surface modifications resulted in a reduction in leakage from 1.8 ml/min to 1.15 ml/min at 200 bar (∼36% improvement), along with a 31% decrease in wear depth after 50,000 cycles. The combined reduction in leakage and friction contributed to an estimated 8%–12% improvement in system-level energy efficiency. Overall, the results demonstrate that MR finishing not only refines surface topography but also significantly enhances sealing performance, durability, and functional reliability, establishing it as a superior alternative to conventional finishing processes for precision hydraulic components.

Zitieren

APA

Singh, M. (2026). Magnetorheological finishing of hydraulic spool valves for leakage control and performance improvement. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089261457460

Vancouver

Singh M. Magnetorheological finishing of hydraulic spool valves for leakage control and performance improvement. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2026. doi:10.1177/09544089261457460

BibTeX
@article{Singh2026,
  author = {Singh, Manpreet},
  title = {Magnetorheological finishing of hydraulic spool valves for leakage control and performance improvement},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
  year = {2026},
  doi = {10.1177/09544089261457460}
}
Kostenlos starten →