Numerical simulation and experimental investigation of incremental forming of non-axisymmetric aluminum sheet parts without a peripheral blank holder
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 25.04.2026
DOI: 10.1177/09544089261431089 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 25.04.2026. Verfasst von Siavash Enayati und 3 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben.
Abstract (Originalsprache)
This study investigates the incremental forming of shallow non-axisymmetric AA6061-T6 aluminum sheet parts without the use of a peripheral blank holder. While most previous studies focus on axisymmetric geometries or constrained blank conditions, the feasibility and deformation behavior of free-edge non-axisymmetric parts remain insufficiently understood. In this work, five different single-stage and multi-stage toolpath strategies are experimentally and numerically evaluated for sheets with free-edge lengths of 6, 10, and 14 mm. The results demonstrate that non-axisymmetric parts can be successfully formed up to a height of 10 mm using multi-stage strategies without peripheral support. Among the investigated approaches, the incremental angle-increase strategy with decreasing diameter improved thickness distribution by up to 7% compared to other strategies. Distinct fracture modes were observed depending on the free-edge length and toolpath design, including circumferential corner cracking and radial edge cracking. Furthermore, analysis of in-plane strain evolution revealed a significant change in strain-path slope at the onset of fracture for larger free edges. These findings provide new insights into deformation stability and fracture mechanisms in free-edge incremental forming of non-axisymmetric geometries.
Zitieren
APA
Enayati, S., Moridi, K., Mirnia, M. J., & Elyasi, M. (2026). Numerical simulation and experimental investigation of incremental forming of non-axisymmetric aluminum sheet parts without a peripheral blank holder. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089261431089
Vancouver
Enayati S, Moridi K, Mirnia MJ, Elyasi M. Numerical simulation and experimental investigation of incremental forming of non-axisymmetric aluminum sheet parts without a peripheral blank holder. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2026. doi:10.1177/09544089261431089
BibTeX
@article{Enayati2026,
author = {Enayati, Siavash and Moridi, Keivan and Mirnia, Mohammad Javad and Elyasi, Majid},
title = {Numerical simulation and experimental investigation of incremental forming of non-axisymmetric aluminum sheet parts without a peripheral blank holder},
journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
year = {2026},
doi = {10.1177/09544089261431089}
}
EUVIMED