EUVIMEDEUVIMED entdecken
Crossref

Modeling milling forces for discrete edge end mills with chip-splitting groove structures

Minli Zheng, Yupeng Si, Wei Zhang, Baojuan Dong, Wei Yang

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 02.03.2026

DOI: 10.1177/09544089261427310 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 02.03.2026. Verfasst von Minli Zheng und 4 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Discrete-edge end mills offer superior performance in machining difficult-to-cut materials by discretizing cutting loads via chip-splitting grooves. However, the nonlinear coupling between groove geometry and three-dimensional force dynamics remains poorly understood. This study establishes a physics-constrained parametric design framework for discrete-edge tools. First, a mechanistic cutting force model, incorporating a novel Boolean effective chip-slot function, is developed to rigorously capture the transient engagement caused by geometric discontinuities. The model is validated against milling experiments on AL7075, confirming its capability to predict the characteristic large-amplitude force fluctuations inherent to discrete cutting. Subsequently, a multiobjective optimization strategy is proposed, bounded by structural stiffness constraints derived from cantilever beam theory. Analysis reveals that the groove width ( λ 2 ) significantly modulates the feed force ( F x ) through a shearing-dominant mechanism, while the phase offset ( ps ) governs dynamic stability. Global optimization results demonstrate that the proposed geometric configuration yields a 26% improvement in the comprehensive performance index and a 28.6% reduction in average cutting forces, providing a robust theoretical basis for the precision design of high-performance cutting tools.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Zheng, M., Si, Y., Zhang, W., Dong, B., & Yang, W. (2026). Modeling milling forces for discrete edge end mills with chip-splitting groove structures. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089261427310

Vancouver

Zheng M, Si Y, Zhang W, Dong B, Yang W. Modeling milling forces for discrete edge end mills with chip-splitting groove structures. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2026. doi:10.1177/09544089261427310

BibTeX
@article{Zheng2026,
  author = {Zheng, Minli and Si, Yupeng and Zhang, Wei and Dong, Baojuan and Yang, Wei},
  title = {Modeling milling forces for discrete edge end mills with chip-splitting groove structures},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
  year = {2026},
  doi = {10.1177/09544089261427310}
}
Kostenlos starten →