EUVIMEDEUVIMED entdecken
Crossref

Study on the quality stability of rolling distortion correction in aluminum alloy aerospace structural components

Chun Liu, Long Yu, Shaohua Fei, Yunbo Bi, Han Wang, Haijin Wang

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 15.10.2025

DOI: 10.1177/09544089251385848 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 15.10.2025. Verfasst von Chun Liu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 24 Literaturangaben. Gefördert von: Ningbo Key Research and Development Program, Shaoxing Tripartite Collaboration (Industry-University-Research) Key Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The aim of the present study was to evaluate the quality stability of roll-corrected 7050-T451 aluminum alloy structural components under operational loading conditions, in order to provide a new method for accurate prediction and control of machining deformation of aluminum alloy structural components. Mechanical load and double-sided rolling test device were designed and constructed based on the mechanical structure and control unit. Subsequently, the quality stability of the specimen was investigated by characterizing the correction dimensions, residual stress, and fatigue fracture morphology under different rolling correction and mechanical force load. The results demonstrate that the ultimate load (F) is 3200 N as the sample undergoes plastic deformation. Compared to post-rolling correction, the deformation of the specimens after 1000 loading cycles at 60% F, 70% F, 80% F and 90% F represented only 11.45%, 9.85%, 9.03% and 4.12% of their dimensions following rolling correction, accompanied by average residual stress variations of 2.37%, 9.19%, 3.43% and 0.92%, respectively. Further, as the number of loading cycles increased, the deformation after 10, 100, 1000 and 10000 cycles at 80% F constituted only 9.03%, 7.40%, 9.76% and 7.23% of the post-rolling correction dimensions, with corresponding average residual stress variations of 3.43%, 3.96%, 2.44% and 4.78%. No significant changes were observed in the macroscopic dimensions or residual stress of the specimens. After rolling, the fatigue crack initiation site shifted from the surface to the subsurface, and the average fatigue striation spacing in the crack propagation zone decreased, indicating an improvement in fatigue performance. This demonstrates that aluminum alloy aerospace structural components exhibit high-quality stability in all aspects after rolling correction.

Förderung

  • Ningbo Key Research and Development Program
  • Shaoxing Tripartite Collaboration (Industry-University-Research) Key Project

Zitieren

APA

Liu, C., Yu, L., Fei, S., Bi, Y., Wang, H., & Wang, H. (2025). Study on the quality stability of rolling distortion correction in aluminum alloy aerospace structural components. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089251385848

Vancouver

Liu C, Yu L, Fei S, Bi Y, Wang H, Wang H. Study on the quality stability of rolling distortion correction in aluminum alloy aerospace structural components. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2025. doi:10.1177/09544089251385848

BibTeX
@article{Liu2025,
  author = {Liu, Chun and Yu, Long and Fei, Shaohua and Bi, Yunbo and Wang, Han and Wang, Haijin},
  title = {Study on the quality stability of rolling distortion correction in aluminum alloy aerospace structural components},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
  year = {2025},
  doi = {10.1177/09544089251385848}
}
Kostenlos starten →