EUVIMEDEUVIMED entdecken
Crossref

A hybrid approach: Box–Behnken design and COPRAS on the investigation of biocompatible polylactic acid via material extrusion

K Nirmal Kumar, R Raj Mohan, K Hareharen, P Dinesh Babu, R Venkatraman

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 2026-06 · 240 (3) · 3431-3442

DOI: 10.1177/09544089241298142 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 20.11.2024. Verfasst von K Nirmal Kumar und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 50 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the performance of biocompatible polylactic acid (PLA) processed through material extrusion/fused filament fabrication (FFF). In this study, the significant FFF input parameters, such as layer deposition, infill angle (degree), and infill percentage (%), were designated to process the PLA based on the screening design experiments. Following Box–Behnken design (BBD), the different input conditions were analyzed to evaluate the performance by assessing the characteristics such as ultimate tensile strength (UTS) and relative density (RD). Printing speed (30 mm/s), nozzle temperature (200°C), and bed temperature (70°C) are considered as fixed input parameters. The novel combination of BBD approach with the Complex Proportional Assessment (COPRAS) technique was employed to obtain the appropriate input conditions. It was beneficial to attain the individual parameter's contribution to the PLA characteristics through analysis of variance and best alternative condition through degree of utility. The combined approach was validated with a composite desirability index “D.” Finally, the hybrid approach yielded better results, such as a maximum ultimate tensile strength (UTS) of 37.43 MPa, relative density (RD) 99.12%, and microhardness 52 HRB under the layer deposition: 0.12 mm, infill angle: 0°, and infill percentage: 100% in the printed biocompatible PLA.

Zitieren

APA

Kumar, K. N., Mohan, R. R., Hareharen, K., Babu, P. D., & Venkatraman, R. (2026). A hybrid approach: Box–Behnken design and COPRAS on the investigation of biocompatible polylactic acid via material extrusion. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 240(3), 3431-3442. https://doi.org/10.1177/09544089241298142

Vancouver

Kumar KN, Mohan RR, Hareharen K, Babu PD, Venkatraman R. A hybrid approach: Box–Behnken design and COPRAS on the investigation of biocompatible polylactic acid via material extrusion. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2026;240(3):3431-3442. doi:10.1177/09544089241298142

BibTeX
@article{Kumar2026,
  author = {Kumar, K Nirmal and Mohan, R Raj and Hareharen, K and Babu, P Dinesh and Venkatraman, R},
  title = {A hybrid approach: Box–Behnken design and COPRAS on the investigation of biocompatible polylactic acid via material extrusion},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
  year = {2026},
  volume = {240},
  number = {3},
  pages = {3431--3442},
  doi = {10.1177/09544089241298142}
}
Kostenlos starten →