EUVIMEDEUVIMED entdecken
Crossref

Mechanical properties of seaweed/banana fiber/hBN filled epoxy composites using Box–Behnken method

Ramraji Kirubakaran, Thirumal Selvan Thamarai Selvan, Suresh Thirupathi, Shenbaga Velu Pitchumani, Venkatachalam Gopalan

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 2026-06 · 240 (3) · 2866-2877

DOI: 10.1177/09544089241282062 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 30.09.2024. Verfasst von Ramraji Kirubakaran und 4 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 50 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Natural particulate reinforced polymer (NPRP) composites are developed to replace synthetic fibers, aiming to reduce costs and environmental impact. Industries such as automotive, electronics, construction and aerospace are turning to filler-reinforced polymer composites and natural bio-fibers to enhance structural properties and develop eco-friendly products. This article presents research on epoxy-based composites fortified with natural and ceramic micro-sized fillers, including seaweed filler (SF), banana fiber (BF) and hexagonal boron nitride (hBN), fabricated using the hand layup technique. Through experiments, the effect of filler loading on the enhancement of mechanical properties such as tensile strength (TS), toughness (T), Young's modulus (YM), resilience (R) and yield strength (YS) of multiphase hybrid composites is investigated. Incorporating mixtures of ceramic filler and natural fillers into the epoxy matrix improves mechanical properties. The results demonstrated that the interlaced composites achieved optimum mechanical properties for S6 sample, including a TS of 24.85 MPa, T of 25.47 MJ/m 3 , YM of 7.15 GPa, R of 0.698 MJ/m 3 and YS of 3.34 MPa. In comparison with S11 samples, the mechanical properties such as TS, T, YM, R and YS of the S6 composite sample are increased by 110.95%, 57.8%, 450%, 501.7% and 292.9%, respectively. The tensile fracture's scanning electron images reveal a homogenous surface with the formation of a fractured surface and defects. Statistical analysis at a 96% confidence level revealed the significance of the interaction between natural and ceramic micro particulate on the TS of the developed interlaced composite material, with a p -value of 0.007.

Zitieren

APA

Kirubakaran, R., Selvan, T. S. T., Thirupathi, S., Pitchumani, S. V., & Gopalan, V. (2026). Mechanical properties of seaweed/banana fiber/hBN filled epoxy composites using Box–Behnken method. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 240(3), 2866-2877. https://doi.org/10.1177/09544089241282062

Vancouver

Kirubakaran R, Selvan TST, Thirupathi S, Pitchumani SV, Gopalan V. Mechanical properties of seaweed/banana fiber/hBN filled epoxy composites using Box–Behnken method. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2026;240(3):2866-2877. doi:10.1177/09544089241282062

BibTeX
@article{Kirubakaran2026,
  author = {Kirubakaran, Ramraji and Selvan, Thirumal Selvan Thamarai and Thirupathi, Suresh and Pitchumani, Shenbaga Velu and Gopalan, Venkatachalam},
  title = {Mechanical properties of seaweed/banana fiber/hBN filled epoxy composites using Box–Behnken method},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
  year = {2026},
  volume = {240},
  number = {3},
  pages = {2866--2877},
  doi = {10.1177/09544089241282062}
}
Kostenlos starten →