EUVIMEDEUVIMED entdecken
Crossref

Investigations on laser-assisted turning of IN625 alloy with hot hardness approach using uncoated and CrAlSiN coated WC tools

Amarendhar Rao, Manish Tak, Narasimha Rao, Krishna Vallleti, Ravi Bathe

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 2026-06 · 240 (3) · 3293-3305

DOI: 10.1177/09544089241279232 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 12.09.2024. Verfasst von Amarendhar Rao und 4 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 35 Literaturangaben. Gefördert von: Department of Science and Technology, India.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents an investigation into the effect of laser-assisted turning of the IN625 superalloy using uncoated and CrAlSiN nanocomposite-coated tungsten carbide tools. A hot hardness test was conducted for IN625 material, which showed there was a pronounced softening of the material above 850 °C. This exercise guided the choice of laser power for the subsequent laser-assisted turning experiments. The cutting forces (radial/thrust, F x ; axial/feed, F y ; and tangential/cutting, F z ), maximum flank wear (VB Bmax ), and surface roughness ( R a ) were measured and analyzed for the planned experiments. The results demonstrated that at 2500 W laser power, a 9%, 70%, and 59% reduction of cutting forces for uncoated tools, and a 31%, 77%, and 69% reduction for CrAlSiN coated tools were observed in the F x , F y , and F z directions respectively. At 2250 W laser power, the uncoated tools exhibited a 33% (433–289 µm) reduction in VB Bmax and a 28% (1.8–1.3 µm) reduction in Ra . The CrAlSiN-coated tools, at 2500 W laser power, showed even more significant improvements, with reductions of 46% (365–232 µm) in VB Bmax and 56% (1.4–0.8 µm) in R a . The results underline the improved performance of laser-assisted turning for cutting-force and tool-wear reduction and improved surface finish with CrAlSiN-coated tools. This paper presents the potential of laser-assisted machining as a viable method for machining difficult-to-machine materials like IN625, which offers enormous manufacturing productivity and tool life benefits.

Förderung

  • Department of Science and Technology, India

Zitieren

APA

Rao, A., Tak, M., Rao, N., Vallleti, K., & Bathe, R. (2026). Investigations on laser-assisted turning of IN625 alloy with hot hardness approach using uncoated and CrAlSiN coated WC tools. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 240(3), 3293-3305. https://doi.org/10.1177/09544089241279232

Vancouver

Rao A, Tak M, Rao N, Vallleti K, Bathe R. Investigations on laser-assisted turning of IN625 alloy with hot hardness approach using uncoated and CrAlSiN coated WC tools. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2026;240(3):3293-3305. doi:10.1177/09544089241279232

BibTeX
@article{Rao2026,
  author = {Rao, Amarendhar and Tak, Manish and Rao, Narasimha and Vallleti, Krishna and Bathe, Ravi},
  title = {Investigations on laser-assisted turning of IN625 alloy with hot hardness approach using uncoated and CrAlSiN coated WC tools},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
  year = {2026},
  volume = {240},
  number = {3},
  pages = {3293--3305},
  doi = {10.1177/09544089241279232}
}
Kostenlos starten →