EUVIMEDEUVIMED entdecken
Crossref

Multiobjective optimization of magnetic abrasive finishing process with periodic re-distribution of magnetic abrasive particles on 17-4PH stainless steel

Rahul Kumar, Venkateswara Rao Komma

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 2026-06 · 240 (3) · 3163-3177

DOI: 10.1177/09544089241278239 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 29.10.2024. Verfasst von Rahul Kumar und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 44 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Magnetic abrasive finishing (MAF) exhibits considerable potential as a promising process for enhancing surface finish quality for softer as well as harder materials. This work proposes a novel approach to harness the potential of MAF for obtaining superior surface quality of precipitation-hardening martensitic steel (17-4PH steel) while performing periodic re-distribution of magnetic abrasive particles. The experiments were conducted using the Box-Behnken design of experiments and response surface methodology (RSM). RSM-based desirability function approach and genetic algorithms were used for multiobjective optimization. The set of pareto-optimal solutions obtained through multiobjective optimization were ranked using the Technique for Order of Preference by Similarity to an Ideal Solution (TOPSIS) by assigning equal importance to the selected performance parameters (percentage change in surface roughness (PCSR) and material removal rate (MRR)). The optimized values of PCSR and MRR obtained through the desirability function of RSM and genetic algorithm were validated experimentally and compared with the predicted values obtained through the regression model. Results showed that the desirability function of RSM provided better results than the genetic algorithm for the selected conditions and confirmed the effectiveness of the proposed approach.

Zitieren

APA

Kumar, R., & Komma, V. R. (2026). Multiobjective optimization of magnetic abrasive finishing process with periodic re-distribution of magnetic abrasive particles on 17-4PH stainless steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 240(3), 3163-3177. https://doi.org/10.1177/09544089241278239

Vancouver

Kumar R, Komma VR. Multiobjective optimization of magnetic abrasive finishing process with periodic re-distribution of magnetic abrasive particles on 17-4PH stainless steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2026;240(3):3163-3177. doi:10.1177/09544089241278239

BibTeX
@article{Kumar2026,
  author = {Kumar, Rahul and Komma, Venkateswara Rao},
  title = {Multiobjective optimization of magnetic abrasive finishing process with periodic re-distribution of magnetic abrasive particles on 17-4PH stainless steel},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
  year = {2026},
  volume = {240},
  number = {3},
  pages = {3163--3177},
  doi = {10.1177/09544089241278239}
}
Kostenlos starten →