Design and rigid body dynamics analysis of a novel retractable drill bit used in casing-while-drilling
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 2026-02 · 240 (1) · 281-291
DOI: 10.1177/09544089241239731 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 24.03.2024. Verfasst von Guoqing Cui und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 36 Literaturangaben. Gefördert von: Natural Science Foundation of Jilin Province.
Abstract (Originalsprache)
Utilizing the Geneva drive mechanism, an inventive retractable drill bit tailored for casing-while-drilling (CwD) applications was developed. This novel design allows the lower segment of the drill bit to be swung outward through rotation, facilitating to drill a larger hole and retrieved effortlessly by raising the drill tools. An exploration into the dynamic behavior of this retractable drill bit under varying drilling conditions was undertaken, focusing on parameters such as weight-on-bit, rotation speed, friction coefficient between the drill bit and rock, and lifting force. Findings from the investigation revealed that, under conditions of 20 kN weight-on-bit, a friction coefficient of 0.3, and a rotation speed of 30 rpm, the drill bit achieved full extension within 3.8 s. Notably, the movement speed of the lower drill bit was notably influenced by weight-on-bit, the friction coefficient, and lifting force, demonstrating accelerated movement with increased values of these factors. Rotation speed, however, exhibited negligible impact on the movement of the drill bit. An indoor experimental examination mirrored the outcomes obtained through simulations. Subsequent to numerical simulations and indoor testing, a large-diameter drill bit was produced and field tested, showcasing its capability to flexibly extend and retract during drilling, achieving an average drilling speed of 1.7 m/h.
Förderung
- Natural Science Foundation of Jilin Province
Zitieren
APA
Cui, G., Cao, P., Zhang, Y., Wang, H., & Yin, Q. (2026). Design and rigid body dynamics analysis of a novel retractable drill bit used in casing-while-drilling. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 240(1), 281-291. https://doi.org/10.1177/09544089241239731
Vancouver
Cui G, Cao P, Zhang Y, Wang H, Yin Q. Design and rigid body dynamics analysis of a novel retractable drill bit used in casing-while-drilling. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2026;240(1):281-291. doi:10.1177/09544089241239731
BibTeX
@article{Cui2026,
author = {Cui, Guoqing and Cao, Pinlu and Zhang, Yalu and Wang, Han and Yin, Qilei},
title = {Design and rigid body dynamics analysis of a novel retractable drill bit used in casing-while-drilling},
journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
year = {2026},
volume = {240},
number = {1},
pages = {281--291},
doi = {10.1177/09544089241239731}
}
EUVIMED