EUVIMEDEUVIMED entdecken
Crossref

Multi-objective optimization and experimental investigation of friction stir welding under Minimum quantity lubrication

Wisam Al-Wajidi, Abdelkrem Eltaggaz, Fantahun M. Defersha, Ibrahim Deiab

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 2025-04 · 239 (2) · 993-1004

DOI: 10.1177/09544089241228697 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 28.02.2024. Verfasst von Wisam Al-Wajidi und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 42 Literaturangaben. Gefördert von: Natural Sciences and Engineering Research Council of Canada, Ontario Centers of Excellence.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aluminium is widely used in the aerospace, marine, and transportation industries. However, achieving defect-free, high-quality welds using conventional welding processes is challenging. Friction stir welding (FSW) is a promising solid-state welding process that is environmentally friendly, produces high-quality welds, and improves the mechanical and other properties of aluminium and other lightweight materials. This study examines the welding force, power consumption, and surface roughness of friction stir-welded 6061-T651 and 5052-H32 aluminium alloys under similar and dissimilar circumstances using the minimum quantity lubrication (MQL) process. The main variables of the MQL system, including flow rate, nozzle orientation, and nozzle diameter, were analysed using analysis of variance. A multi-objective model was used to predict the optimal levels, and grey relational analysis techniques were applied for optimization. Furthermore, this study provides a clear mechanism for using MQL during FSW. The results indicate that a flow rate of 7.5 ml/h reduces welding forces by 25% and 4% compared to 5 ml/h and 10 ml/h, respectively. Additionally, the 7.5 ml/h flow rate reduces power consumption by 20% and 10% compared to 5 ml/h and 10 ml/h, respectively. In addition, it improves the surface quality. The orientation nozzle angle of 60° yielded slightly better results than those at the other levels. Similarly, for the nozzle diameter, both 2.5 mm and 3.75 mm showed slightly better results in terms of welding forces, power consumption, and surface roughness.

Förderung

  • Natural Sciences and Engineering Research Council of Canada
  • Ontario Centers of Excellence

Zitieren

APA

Al-Wajidi, W., Eltaggaz, A., Defersha, F. M., & Deiab, I. (2025). Multi-objective optimization and experimental investigation of friction stir welding under Minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 239(2), 993-1004. https://doi.org/10.1177/09544089241228697

Vancouver

Al-Wajidi W, Eltaggaz A, Defersha FM, Deiab I. Multi-objective optimization and experimental investigation of friction stir welding under Minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2025;239(2):993-1004. doi:10.1177/09544089241228697

BibTeX
@article{AlWajidi2025,
  author = {Al-Wajidi, Wisam and Eltaggaz, Abdelkrem and Defersha, Fantahun M. and Deiab, Ibrahim},
  title = {Multi-objective optimization and experimental investigation of friction stir welding under Minimum quantity lubrication},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
  year = {2025},
  volume = {239},
  number = {2},
  pages = {993--1004},
  doi = {10.1177/09544089241228697}
}
Kostenlos starten →