EUVIMEDEUVIMED entdecken
Crossref

Optimisation and comparison of performance parameters of a double pipe heat exchanger with dimpled twisted tapes using CFD and ANN

Jatoth Heeraman, Ravinder Kumar, Prem Kumar Chaurasiya, Tikendra Nath Verma, Davendra Kumar Chauhan

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 2025-12 · 239 (6) · 3251-3268

DOI: 10.1177/09544089231223599 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 14.02.2024. Verfasst von Jatoth Heeraman und 4 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 41 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Double pipe heat exchanger (DPHE) is a key component of a wide variety of fields where heat trans-mission is a necessity. The numerical simulation was carried out using ANSYS 16.0 within the operating Reynolds number ( Re ) 6000 to 14,000 to explore and estimate the thermal performance of the heat exchangers (HEs). Computational fluid dynamic (CFD) analysis was performed for the tube tailored with tape twisted (TT) with dimples of Día = 6 mm, D/H Ratio = 1.5, 3 and 4.5, with twist ratio is 5.5. The gathered datasets were subsequently employed validate an artificial neural network (ANN) model, aiming to forecast Nusselt numbers and friction factor within a tube containing dimpled twisted tape inserts. The mean relative errors (MRE) between the predicted results, experimental data and numerical results for the Nusselt numbers and the friction factor were less than 3.30, 0.08 and 2.1 percentage, respectively. Consequently, the study suggests employing the combination of CFD and ANN models as a means to forecast the effectiveness of thermal systems in diverse engineering applications. The efficiency of heat transmission, frictional loss, flow rates and heat transfer rate were all determined using these quantitative simulations.

Zitieren

APA

Heeraman, J., Kumar, R., Chaurasiya, P. K., Verma, T. N., & Chauhan, D. K. (2025). Optimisation and comparison of performance parameters of a double pipe heat exchanger with dimpled twisted tapes using CFD and ANN. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 239(6), 3251-3268. https://doi.org/10.1177/09544089231223599

Vancouver

Heeraman J, Kumar R, Chaurasiya PK, Verma TN, Chauhan DK. Optimisation and comparison of performance parameters of a double pipe heat exchanger with dimpled twisted tapes using CFD and ANN. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2025;239(6):3251-3268. doi:10.1177/09544089231223599

BibTeX
@article{Heeraman2025,
  author = {Heeraman, Jatoth and Kumar, Ravinder and Chaurasiya, Prem Kumar and Verma, Tikendra Nath and Chauhan, Davendra Kumar},
  title = {Optimisation and comparison of performance parameters of a double pipe heat exchanger with dimpled twisted tapes using CFD and ANN},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
  year = {2025},
  volume = {239},
  number = {6},
  pages = {3251--3268},
  doi = {10.1177/09544089231223599}
}
Kostenlos starten →