EUVIMEDEUVIMED entdecken
Crossref

Friction stir welding of dissimilar AA7050 and AA5083 aluminium alloys: Microstructural and mechanical characterization

K Subrahmanian, K K Ramachandran, V R Rajeev, V B Renjith

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 2024-10 · 238 (5) · 2139-2150

DOI: 10.1177/09544089231213086 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 19.11.2023. Verfasst von K Subrahmanian und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 29 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, dissimilar aluminium alloys, AA7050-T7651 and AA5083-H111, with 5 mm thickness were friction stir butt welded and the microstructural and mechanical properties of the joints are investigated. The experiments were carried out at tool rotational speeds of 800, 1000 and 1200 rpm while keeping the tool traverse speed, axial force and tool tilt angle, respectively, at constant values of 30 mm/min, 3.5 kN and 1.5°. A tool axis offset of 0.25 mm towards the 7xxx alloy side that fixed by a detailed preliminary study was used in all the trials. All the fabricated joints were externally defect-free and the fractured tensile specimens showed that the joints have fractured in the thermo-mechanically affected zone (TMAZ) at the AA5083-H111 alloy side. The highest ultimate tensile strength of 294 MPa (96% joint efficiency) was observed for the joint fabricated at tool rotation speed of 1000 rpm. The location of fracture together with the microstructure observation at the joint zone showed that the coarsening of grains and loss of cold work are the causes of fracture of the tensile specimen at the TMAZ of the 5083-alloy side. In addition, significant grain coarsening and dissolution of precipitates are observed at the heat-affected zone and TMAZ at the 7050-alloy side at tool rotational speeds of 1000 rpm and 1200 rpm. The study testified that the tool rotational speed has a significant influence on the microstructure and tensile properties of the dissimilar joints.

Zitieren

APA

Subrahmanian, K., Ramachandran, K. K., Rajeev, V. R., & Renjith, V. B. (2024). Friction stir welding of dissimilar AA7050 and AA5083 aluminium alloys: Microstructural and mechanical characterization. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 238(5), 2139-2150. https://doi.org/10.1177/09544089231213086

Vancouver

Subrahmanian K, Ramachandran KK, Rajeev VR, Renjith VB. Friction stir welding of dissimilar AA7050 and AA5083 aluminium alloys: Microstructural and mechanical characterization. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2024;238(5):2139-2150. doi:10.1177/09544089231213086

BibTeX
@article{Subrahmanian2024,
  author = {Subrahmanian, K and Ramachandran, K K and Rajeev, V R and Renjith, V B},
  title = {Friction stir welding of dissimilar AA7050 and AA5083 aluminium alloys: Microstructural and mechanical characterization},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
  year = {2024},
  volume = {238},
  number = {5},
  pages = {2139--2150},
  doi = {10.1177/09544089231213086}
}
Kostenlos starten →