EUVIMEDEUVIMED entdecken
Crossref

Hydrogen influence on kapok methyl ester blended with DEE as an alternate fuel in CI engine

P Udayakumar, G Kasiraman

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 2024-02 · 238 (1) · 474-482

DOI: 10.1177/09544089231190496 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 01.08.2023. Verfasst von P Udayakumar und 1 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 42 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Kapok oil methyl ester (KOME) is used as a pilot fuel, while hydrogen and diethyl ether (DEE) are used as secondary fuels to improve the performance, emissions and combustion of a direct injection compression ignition engine. With a compression ignition engine, a slight modification to the system enables hydrogen gas through the intake manifold. A flow metre limits the quantity of energy the hydrogen may produce off, and two flame arresters prevent backfires in the fuel line. At full load and maximum hydrogen energy sharing, KOME + 20%DEE obtained a brake thermal efficiency of 30.31%, which is 14% higher than without hydrogen enrichment and about 8% higher than diesel's value (0% hydrogen energy share). The main problem with previous research is that hydrogen with a high heating value makes greater amounts of nitric oxide. Diethyl ether, on the other hand, has fixed this major problem, and the absence of carbon in hydrogen fuel lowers CO, HC and smoke emissions.

Zitieren

APA

Udayakumar, P., & Kasiraman, G. (2024). Hydrogen influence on kapok methyl ester blended with DEE as an alternate fuel in CI engine. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 238(1), 474-482. https://doi.org/10.1177/09544089231190496

Vancouver

Udayakumar P, Kasiraman G. Hydrogen influence on kapok methyl ester blended with DEE as an alternate fuel in CI engine. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2024;238(1):474-482. doi:10.1177/09544089231190496

BibTeX
@article{Udayakumar2024,
  author = {Udayakumar, P and Kasiraman, G},
  title = {Hydrogen influence on kapok methyl ester blended with DEE as an alternate fuel in CI engine},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
  year = {2024},
  volume = {238},
  number = {1},
  pages = {474--482},
  doi = {10.1177/09544089231190496}
}
Kostenlos starten →