EUVIMEDEUVIMED entdecken
Crossref

Extrusion strategies in fused deposition additive manufacturing: A review

Krishnanand, Varanjot Singh, Vatsal Mittal, Amar Kumar Branwal, Krishnendra Sharma, Mohammad Taufik

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 2024-04 · 238 (2) · 988-1012

DOI: 10.1177/09544089221150709 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 19.01.2023. Verfasst von Krishnanand und 5 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 129 Literaturangaben. Gefördert von: Science and Engineering Research Board.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fused deposition or fused layer additive manufacturing is a technique in which a part is fabricated layer by layer using filament or pellets-form input material. The extruder is the central part of the fused deposition additive manufacturing (FDAM) system. The extrusion mechanism is unique to the geometry and form of the feedstock material. Extrusion of filament-form material through the nozzle needs to design of a material feeding mechanism based on various filament extrusion parameters. At the same time if the material is in the form of pellets, then the design of the feeding mechanism is very different due to the shape and size of the pellets. These two different design strategies for material extrusion namely the design of the feeding mechanism of filament and pellets form materials have been a major concern to avoid unwanted deformation of extruded materials in FDAM. These two design strategies for filament and pellet-form materials have led to the development of several material extrusion strategies. The present paper reviews various material extrusion strategies developed for FDAM of filament or pellets form input material. This article presents the review of design, development, performance evaluation, and process planning for each extrusion strategy. Based on the literature review authors have suggested a possible extrusion method that can accept both forms of materials to fulfill the need for the filament as well as pellets-based additive manufacturing.

Förderung

  • Science and Engineering Research Board

Zitieren

APA

Krishnanand, Singh, V., Mittal, V., Branwal, A. K., Sharma, K., & Taufik, M. (2024). Extrusion strategies in fused deposition additive manufacturing: A review. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 238(2), 988-1012. https://doi.org/10.1177/09544089221150709

Vancouver

Krishnanand, Singh V, Mittal V, Branwal AK, Sharma K, Taufik M. Extrusion strategies in fused deposition additive manufacturing: A review. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2024;238(2):988-1012. doi:10.1177/09544089221150709

BibTeX
@article{Krishnanand2024,
  author = {Krishnanand and Singh, Varanjot and Mittal, Vatsal and Branwal, Amar Kumar and Sharma, Krishnendra and Taufik, Mohammad},
  title = {Extrusion strategies in fused deposition additive manufacturing: A review},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
  year = {2024},
  volume = {238},
  number = {2},
  pages = {988--1012},
  doi = {10.1177/09544089221150709}
}
Kostenlos starten →