EUVIMEDEUVIMED entdecken
Crossref

Machinability improvement investigation in face milling of Ti–3Al–2.5V alloys using TiAlN coated carbide insert under dual nozzle minimum quantity lubrication cooling environment

Prashant Kumar Tiwari, Samar Raj, Ramanuj Kumar, Amlana Panda, Ashok Kumar Sahoo

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 2025-06 · 239 (3) · 1074-1089

DOI: 10.1177/09544089221132449 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 26.10.2022. Verfasst von Prashant Kumar Tiwari und 4 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 69 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research presents the machinability analysis in face milling of Ti–3Al–2.5V alloys using TiAlN-coated carbide insert under dual nozzle minimum quantity lubrication (MQL) cooling conditions. The TiAlN-coated insert has several favorable characteristics like superior wear resistance, greater hardness, and high chemical stability at elevated temperatures. The performance capability of this cutting insert was assessed using machinability responses such as surface roughness, tool wear, and cutting temperature results. The improved quality finish was found with maximum Ra (0.823 µm) while the improved accuracy of flatness (0.044) was obtained even though the rotational speed of the face mill cutter ( N ) was highest (1500 r/min). Likewise, an acceptable range of flank wear (0.058–0.118 mm) and a lower range of cutting temperature (65 °C–106.8 °C) was found due to the superior thermal characteristics of TiAlN coating, effective cooling, and lubricating capability of the dual nozzle MQL system in face milling to this alloy. Further, by using the entropy coupled multi-objective optimization ratio analysis method, the optimal value of milling parameters was computed as coolant flow rate ( Q ) 50 ml/h, feed speed (vf) 200 mm/min, and rotational speed of the face mill cutter ( N ) 500 r/min. At this optimal setting, the optimum Ra, VBc, and T were found as Ra = 0.596 µm; VBc = 0.058 mm, and T = 65 °C, respectively.

Zitieren

APA

Tiwari, P. K., Raj, S., Kumar, R., Panda, A., & Sahoo, A. K. (2025). Machinability improvement investigation in face milling of Ti–3Al–2.5V alloys using TiAlN coated carbide insert under dual nozzle minimum quantity lubrication cooling environment. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 239(3), 1074-1089. https://doi.org/10.1177/09544089221132449

Vancouver

Tiwari PK, Raj S, Kumar R, Panda A, Sahoo AK. Machinability improvement investigation in face milling of Ti–3Al–2.5V alloys using TiAlN coated carbide insert under dual nozzle minimum quantity lubrication cooling environment. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2025;239(3):1074-1089. doi:10.1177/09544089221132449

BibTeX
@article{Tiwari2025,
  author = {Tiwari, Prashant Kumar and Raj, Samar and Kumar, Ramanuj and Panda, Amlana and Sahoo, Ashok Kumar},
  title = {Machinability improvement investigation in face milling of Ti–3Al–2.5V alloys using TiAlN coated carbide insert under dual nozzle minimum quantity lubrication cooling environment},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
  year = {2025},
  volume = {239},
  number = {3},
  pages = {1074--1089},
  doi = {10.1177/09544089221132449}
}
Kostenlos starten →