Microstructural evolution and mechanical properties of multiwalled carbon nanotubes/Al6082 nanocomposites through optimized T6 heat treatment process
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 2023-08 · 237 (4) · 1145-1157
DOI: 10.1177/09544089221116958 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 05.08.2022. Verfasst von Madhusudan Baghel und 1 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 46 Literaturangaben.
Abstract (Originalsprache)
A modified stir casting method was used to fabricate novel Al6082 composites reinforced with 0, 0.3, 0.6, 0.9, and 1.2 wt% of multiwalled carbon nanotubes (MWCNTs). A field emission scanning electron microscope was used to examine the microstructure, while elemental evaluation was performed with an energy dispersive X-ray spectrometer. MWCNTs/Al6082 composites were subjected to a heat treatment cycle (T6) to enhance their mechanical strength. Mechanical alloying and ultrasonication enhanced the wettability during fabrication resulting in the uniform distribution of MWCNTs up to 0.9 wt%. Ultimate tensile strength, yield strength, and hardness of 0.9 wt% MWCNTs/Al6082 nanocomposites were enhanced over Al6082 alloy by 41.94%, 40.73%, and 42.97% at the as-cast condition and 76.96%, 81.61%, and 64.62% at peak-aged condition, respectively. Furthermore, nanocomposite fractography represented a mixture of ductile and brittle fracture for 0.3 wt% MWCNTs and brittle fracture for further addition of MWCNTs.
Zitieren
APA
Baghel, M., & Krishna, C. (2023). Microstructural evolution and mechanical properties of multiwalled carbon nanotubes/Al6082 nanocomposites through optimized T6 heat treatment process. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 237(4), 1145-1157. https://doi.org/10.1177/09544089221116958
Vancouver
Baghel M, Krishna C. Microstructural evolution and mechanical properties of multiwalled carbon nanotubes/Al6082 nanocomposites through optimized T6 heat treatment process. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2023;237(4):1145-1157. doi:10.1177/09544089221116958
BibTeX
@article{Baghel2023,
author = {Baghel, Madhusudan and Krishna, CM},
title = {Microstructural evolution and mechanical properties of multiwalled carbon nanotubes/Al6082 nanocomposites through optimized T6 heat treatment process},
journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
year = {2023},
volume = {237},
number = {4},
pages = {1145--1157},
doi = {10.1177/09544089221116958}
}
EUVIMED