EUVIMEDEUVIMED entdecken
Crossref

Coordinated optimization of handling stability of commercial vehicle suspension-steering system coupling based on gray relational analysis method

Zhigang Zhou, Aoqi Yan, Shuai Zhang, Feng Xiong, Xuan Jia, Jinyuan Zhang, Hongyu Yin, Zhiqiang Xi

Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering · 20.11.2026

DOI: 10.1177/09544070261507749 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, online erschienen am 20.11.2026. Verfasst von Zhigang Zhou und 7 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Gefördert von: Academic Projects of Henan Science and Technology Association for Young Scientist Salon, National Natural Science Foundation of China, Key Research and Development Project of Henan Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To improve the handling stability of commercial buses and the design performance of their suspension and steering systems, this paper proposes a collaborative optimization method for handling stability considering suspension-steering system coupling based on the gray relational analysis method. The suspension-steering assembly and full-vehicle dynamic models are developed, and their accuracy is validated through road tests conducted in compliance with Chinese national standards. Hard-point coordinates of the suspension and steering systems are selected as design variables. The gray relational analysis (GRA) is introduced to address the conflicts among multiple variables and objectives, identifying six high-impact hard-point coordinates as optimized design variables. A co-simulation platform integrating Adams/Car and Isight is developed. Combined with the response surface methodology (RSM) surrogate model and the non-dominated sorting genetic algorithm-II (NSGA-II), a multi-objective collaborative optimization is performed for full-vehicle handling stability. The resulting Pareto front solution set is obtained, and the optimal compromise solution is selected via GRA. The optimization results demonstrate that the average peak steering wheel angle under the slalom test condition of the full-vehicle is reduced by 4.7%, the peak steering wheel angle under the steering returnability test condition is reduced by 6.2%, and all other evaluated performance metrics are concurrently improved. The effectiveness of the optimization scheme in enhancing handling stability is validated, which provides a methodological reference for the chassis design of commercial buses.

Förderung

  • Academic Projects of Henan Science and Technology Association for Young Scientist Salon
  • National Natural Science Foundation of China
  • Key Research and Development Project of Henan Province
  • Open Fund Project of State Key Laboratory of Structural Analysis, Optimization and CAE Software for Industrial Equipment

Zitieren

APA

Zhou, Z., Yan, A., Zhang, S., Xiong, F., Jia, X., Zhang, J., Yin, H., & Xi, Z. (2026). Coordinated optimization of handling stability of commercial vehicle suspension-steering system coupling based on gray relational analysis method. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. https://doi.org/10.1177/09544070261507749

Vancouver

Zhou Z, Yan A, Zhang S, Xiong F, Jia X, Zhang J, et al. Coordinated optimization of handling stability of commercial vehicle suspension-steering system coupling based on gray relational analysis method. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 2026. doi:10.1177/09544070261507749

BibTeX
@article{Zhou2026,
  author = {Zhou, Zhigang and Yan, Aoqi and Zhang, Shuai and Xiong, Feng and Jia, Xuan and Zhang, Jinyuan and Yin, Hongyu and Xi, Zhiqiang},
  title = {Coordinated optimization of handling stability of commercial vehicle suspension-steering system coupling based on gray relational analysis method},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering},
  year = {2026},
  doi = {10.1177/09544070261507749}
}
Kostenlos starten →