Temperature prediction and cooling optimization for integrated electric drives via reinforcement learning
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering · 20.11.2026
DOI: 10.1177/09544070261506864 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, online erschienen am 20.11.2026. Verfasst von Yan Zhang und 7 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Gefördert von: Science and Technology Innovation Key R&D Program of Chongqing, Natural Science Foundation of Chongqing, Youth project of science and technology research program of Chongqing Education Commission of China.
Abstract (Originalsprache)
Accurate temperature prediction and cooling optimization are vital for integrated electric drive systems (EDS). This study develops a lumped parameter thermal network (LPTN) model to evaluate the global thermal behavior of a three-in-one EDS, comprising the motor, water-cooled controller, and oil-cooled reducer. Steady-state validation reveals severe thermal concentration at the motor winding ends, with winding end2 identified as the highest thermal load for detailed analysis. Simulations show winding end2 reaches 120.398°C at rated conditions (2.032% relative error vs measurements) and 117°C at peak speed (0.863% error). To address non-linear thermal dynamics during the NEDC driving cycle, a reinforcement learning (RL) algorithm was implemented to dynamically optimize cooling pump speeds. To further interpret the cooling-control behavior, equivalent pump-speed, pump-power, and cumulative pump-energy indices were reconstructed from the simulated thermal response and equivalent cooling demand. Compared to conventional PID control, the RL strategy mitigated overall thermal loads, reducing motor and controller temperatures by 2°C–5°C and reducer gear temperatures by 1°C–4°C. The equivalent energy-index analysis indicates that the RL strategy suppresses peak temperatures by actively allocating cooling effort during high-load operation, thereby providing a broader thermal safety margin for integrated EDS.
Förderung
- Science and Technology Innovation Key R&D Program of Chongqing
- Natural Science Foundation of Chongqing
- Youth project of science and technology research program of Chongqing Education Commission of China
- Guangxi key laboratory of Automobile Components and Vehicle technology, Guangxi University of Science and Technology
- Sponsored by Natural Science Foundation of Chongqing
Zitieren
APA
Zhang, Y., Bu, X., He, L., Wu, L., Feng, R., Tong, B., Tan, L., & Liu, T. (2026). Temperature prediction and cooling optimization for integrated electric drives via reinforcement learning. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. https://doi.org/10.1177/09544070261506864
Vancouver
Zhang Y, Bu X, He L, Wu L, Feng R, Tong B, et al. Temperature prediction and cooling optimization for integrated electric drives via reinforcement learning. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 2026. doi:10.1177/09544070261506864
BibTeX
@article{Zhang2026,
author = {Zhang, Yan and Bu, Xingyan and He, Liange and Wu, Limin and Feng, Renhua and Tong, Bingqi and Tan, Lantian and Liu, Tangzhi},
title = {Temperature prediction and cooling optimization for integrated electric drives via reinforcement learning},
journal = {Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering},
year = {2026},
doi = {10.1177/09544070261506864}
}
EUVIMED