EUVIMEDEUVIMED entdecken
Crossref

DOE–RSM based multi-objective geometry optimisation of a heavy-duty ladder chassis under fatigue safety constraints

Shivansh Dutt Shukla, Kheelraj Pandey, Ashwani Sharma

Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering · 12.08.2026

DOI: 10.1177/09544070261474611 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, online erschienen am 12.08.2026. Verfasst von Shivansh Dutt Shukla und 2 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A DOE–RSM-based multi-objective optimisation framework was developed using ANSYS Mechanical simulation results. The optimisation simultaneously minimised deformation and structural mass while maximising the fatigue safety factor (FoS) through optimisation-function approach (desirability function), using side rail thickness (X 1 ), cross-member thickness (X 2 ), and side rail height (X 3 ) as design variables. A Central Composite Design (CCD) has been used to establish second-order regression models representing the design space. Response surface models were developed and evaluated for statistical significance using ANOVA, while predictive accuracy was independently verified through ANSYS validation simulations at the optimised design conditions. The subsequent models developed exhibited high predictive capability, with coefficients of determination exceeding 98% and validation errors below 5% when compared with ANSYS validation FEA simulations. The outcomes highlighted that side rail height played a major role in governing total deformation and fatigue behaviour through its influence on bending stiffness, whereas variations in thickness of the frame primarily affected the structural weight. HSLA steel exhibited approximately 68% lower deformation (7.13 mm) and a fatigue safety factor of approximately 2.45. Meanwhile, aluminium succeeded in about 67% weight reduction but could not meet the required fatigue safety criterion (FoS > 1) for the loading cases considered.

Zitieren

APA

Shukla, S. D., Pandey, K., & Sharma, A. (2026). DOE–RSM based multi-objective geometry optimisation of a heavy-duty ladder chassis under fatigue safety constraints. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. https://doi.org/10.1177/09544070261474611

Vancouver

Shukla SD, Pandey K, Sharma A. DOE–RSM based multi-objective geometry optimisation of a heavy-duty ladder chassis under fatigue safety constraints. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 2026. doi:10.1177/09544070261474611

BibTeX
@article{Shukla2026,
  author = {Shukla, Shivansh Dutt and Pandey, Kheelraj and Sharma, Ashwani},
  title = {DOE–RSM based multi-objective geometry optimisation of a heavy-duty ladder chassis under fatigue safety constraints},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering},
  year = {2026},
  doi = {10.1177/09544070261474611}
}
Kostenlos starten →